answersLogoWhite

0

This is really a local code question. Your best bet is to call your local building inspector and ask.

User Avatar

Wiki User

18y ago

What else can I help you with?

Continue Learning about Natural Sciences

How do you relocate an electrical panel to outside the house to where the electric meter is?

.This is a complicated job in as much as you have to know wire sizes, ampacity of wires and proper electrical workmanship. Such a project should be left to a licensed electrical contractor to take out the proper permits and call for proper inspections. By taking this route it will leave you confident that if any mishaps happen to the installation down the road your insurance company will be behind you 100%.


On a WC macerator installation the electrical supply to the unit should be wired from?

The electrical supply to a WC macerator installation should be wired from an appropriately rated electrical circuit that complies with local building codes. It is important to ensure that the wiring is done by a qualified electrician to guarantee safety and compliance with regulations. The macerator should have its own dedicated circuit to prevent overloading and ensure reliable operation.


What color screw terminal should the ground wire be connected to?

The ground wire should typically be connected to the green screw terminal or the one labeled "GND" for proper grounding. It's important to follow the color coding and labeling recommendations specified in the electrical installation instructions for safety and proper functionality.


When any electrical equipment is to be overhauled or repaired the main supply should be?

The main supply should be isolated and locked out to prevent any unexpected energization while the equipment is being overhauled or repaired. This ensures the safety of the personnel working on the equipment and reduces the risk of electrical hazards.


Does the electrical wall outlet half to be same hook up as hook up at box?

To ensure proper installation and safety, the electrical wall outlet should have the same hook-up as the wiring in the electrical box. It is important to follow local electrical codes and guidelines, and if you are unsure, it is recommended to consult a licensed electrician.

Related Questions

How deep should PVC electrical conduit be buried to ensure proper installation and safety?

PVC electrical conduit should be buried at a depth of at least 18 inches to ensure proper installation and safety.


What gauge wire should be used for a dryer installation?

For a dryer installation, it is recommended to use a 10-gauge wire to ensure proper electrical safety and performance.


Electrical equipment that is defective should be?

Electrical equipment that is defective should be where possible repaired and if not repairable it should be replaced.


How can I add a neutral wire to a light switch for proper electrical installation?

To add a neutral wire to a light switch for proper electrical installation, you may need to run a new wire from the switch to the electrical panel. This wire should be connected to the neutral bus bar in the panel. It is important to follow all safety guidelines and consult a licensed electrician if you are unsure about the process.


What would you do if the electrical cleaning equipment is grounded?

The electrical cleaning equipment should be grounded. This grounding is what protects the operator from a serious shock should the the cleaning equipment have an electrical fault occur.


What would you do if you electrical cleaning equipment is grounded?

The electrical cleaning equipment should be grounded. This grounding is what protects the operator from a serious shock should the the cleaning equipment have an electrical fault occur.


What safety measures should be taken to prevent electric shock sounds in a workplace environment?

To prevent electric shock in a workplace, safety measures such as regular equipment inspections, proper training for employees, use of personal protective equipment, installation of ground fault circuit interrupters, and ensuring all electrical work is done by qualified professionals should be implemented.


How far should a toilet be positioned from the wall for proper installation?

A toilet should be positioned about 15 inches away from the wall for proper installation.


Should the pilot hole be smaller than the screw for proper installation?

Yes, the pilot hole should be smaller than the screw for proper installation.


What type of wire should be used for a 200 amp underground electrical installation?

For a 200 amp underground electrical installation, it is recommended to use copper wire with a minimum size of 2/0 AWG (American Wire Gauge) or larger to ensure proper conductivity and safety.


What type of wire should be used for a 100 amp sub panel installation?

For a 100 amp sub panel installation, it is recommended to use copper wire with a gauge size of 3 AWG or larger. This will ensure proper electrical conductivity and safety for the installation.


How much gravel should be placed under concrete for proper installation?

A minimum of 4 inches of gravel should be placed under concrete for proper installation.