answersLogoWhite

0

A split-ring connector is a metal ring with prongs that penetrate into the wood to hold the timber together. It is often used in timber framing to join beams or trusses. The split-ring connector is hammered into pre-drilled holes in the wood, creating a strong and durable connection.

User Avatar

AnswerBot

1y ago

What else can I help you with?

Related Questions

Terminolgy used in timber framed buildings?

Post = Vertical Supporting Member - often a 6x8, 8x8, 8x10, 10x10 or 12x12 Girt = Horizontal carrying beam used to support floors - often a 6x10, 8x10, or 8x12 Bent = The timbers used to frame a cross section through a building Connector = A Timber Beam used to 'connect' bents together. Brace = A small angled member usually on a 45 degree angle between a post and a girt. Rafter = A sloped beam that supports the roof. Top Chord = The sloping timber on the top of a roof truss. Bottom Chord = The lower timber in a truss. Web = Angled members between the top and bottom chords. Joinery = The method that holds the beams together. Gusset = A steel plate fastened to the face of two or more timbers to hold them together. Knife Plate = A steel place that is sliced into two or more timbers to hold them together. Learn more about Timber Frames here: http://www.vermonttimberworks.com/index.html


What are Structural members of a timber framed house?

Almost all members in a timber frame house are structural. Think of a timber frame as a skeleton, just like all the bones in a body are structurally important, all the parts of a timber frame are important. Posts hold up the girts, which hold the joists, which hold the floor. The posts also hold up the rafter plates that hold up the rafters and roof system.


What do dipole dipole forces do?

Hold polar molecules together


How do you turn signal lights in a Ford Aerostar?

Take hold of the turn signal light connector. Push the connector in and turn at the same time. The connector and light will come free. Do the same with the light bulb to remove it.


Do covalent bonds hold together ions or atoms?

Covalent bonds hold atoms together. Ionic bonds hold ions together


If you hold on together in Tagalog?

Tagalog Translation of IF YOU HOLD ON TOGETHER: Kung makakatagal kayong dalawa.


Do cartilage and tendons hold joints together?

Yes, cartilage and tendons hold joints together.


What secures the physical connection within the connector?

The physical connection within a connector is typically secured by several mechanisms, including locking mechanisms such as latches or clips that hold the connector in place. Additionally, the design of the connector itself often includes features like alignment keys or guides that ensure proper mating of the connectors. Some connectors may also utilize friction or screw-threaded designs to enhance stability and prevent accidental disconnection. Together, these features ensure a reliable and secure physical connection.


How do you change the headlights in an opel tigra?

Open the hood to the engine compartment. Locate the light bulb connector on the back of the headlight. Take hold of the connector, push in and turn at the same time.


What hold a chemical bond hold together?

ATOMS


Joints hold bones together are called what?

The ligaments forms a joint to connect and hold bones together.


What type of bond is needed to hold polymers together?

Covalent bonds generally hold polymers together.