The length of an electric circuit can vary depending on factors such as voltage, current, and wire gauge. In general, the longer the circuit, the higher the resistance and the greater the loss of electrical energy. It is recommended to keep electric circuits as short as possible to minimize energy loss and ensure efficient operation.
Voltage causes current to flow in an electric circuit.
Current in an electric circuit is caused by the movement of electric charges, usually electrons, through a conductor. This movement is typically initiated by applying a voltage difference across the circuit, which creates an electric field that pushes the charges. The current flow will continue as long as there is a closed path for the charges to move through.
Yes, an electric circuit can be completed without connecting it to earth. The circuit needs a complete path for the current to flow back to the source, so as long as the circuit is properly connected and the electrons can flow through the components, it will work without needing an earth connection.
yes
Generally we use electric switches to put on or off the light,fan,computer,music system,etc.An electric switch is a device that is used to open or close an electric circuit.when we open an electric circuit the flow of electric current inthe circuit stops and when we close an electric circuit an electric current flows through it.
Too vague of a question. As long as it is a closed circuit it will flow.
I guess Electric Circuit....
Voltage causes current to flow in an electric circuit.
The term is "circuit" (from the same root as circle) An electric circuit must be uninterrupted for the current to flow. (This is why circuit-breakers are also called circuit-interruptors.)
the history of the electric circuit is that the person who made it his name is jack kilby but the history is that the electric circuit was one of the easiest way was to make the electric circuit when the electricity went out. THE END
Yes, as long as the unbroken path is a good conductor of electricity.
Anything with a voltage power source, connecting wire and a load is an electric circuit. Hence if you have a flashlight you have an electric circuit.
The impedance of an electric circuit is the measure of the opposition presented by a circuit when the current and voltage is applied.
Current in an electric circuit is caused by the movement of electric charges, usually electrons, through a conductor. This movement is typically initiated by applying a voltage difference across the circuit, which creates an electric field that pushes the charges. The current flow will continue as long as there is a closed path for the charges to move through.
You can start an electric circuit by closing the circuit, typically by turning a switch on. You can stop an electric circuit by opening the circuit, usually by turning a switch off or disconnecting a wire.
When energy passes through a metal it creates an electric circuit.
An electric circuit is opened whenever a part of it is not connected to anything.