On 120 volts seven could be used, on 240 v fourteen of them.
A 1 megawatt power station can power 10,000 100W bulbs. This is because 1 megawatt is equal to 10,000 100W bulbs in terms of power consumption.
It depends on the wattage of the toaster. If the toaster has a wattage greater than 100W, then it will use more electricity than a 100W light bulb. If the toaster has a wattage less than 100W, then the light bulb will use more electricity.
It uses modern technology to give better efficiency. A filament bulb has an incandescent (hot) piece of tungsten wire, which produces light but also heat. A fluorescent bulb uses a different process to produce more light and less heat.
If the fixture was the exact same, and one held a single bulb and one held a double bulb then NO. The light given off bulbs is marked as wattage when you look at the package. So a 100w bulb has less light than two 75w bulbs together, because the two equal 150w.
The 100W bulb emits more light energy per second than the 40W bulb, so it appears brighter due to the higher intensity of light. This increase in brightness is a result of the higher power consumption and light output of the 100W bulb compared to the 40W bulb.
The 100w light bulbs were no longer being manufactured by 1st September 2009. Although some people still have these types of lights around their homes, the manufacturing companies has stop producing them.
A 1 megawatt power station can power 10,000 100W bulbs. This is because 1 megawatt is equal to 10,000 100W bulbs in terms of power consumption.
The total energy used in one hour by 10 100W light bulbs is 1 kWh (kilowatt-hour). To calculate this, you multiply the power of each bulb by the number of bulbs and the time they are on. In this case, 100W * 10 bulbs * 1 hour = 1000 watt-hours = 1 kWh.
Power = voltage times current, and ohm's law state's R = V / I, so the lower wattage light bulb must have the higher resistance.
There are 60W, 75W, 100W, and 150W bulbs. No standard 110W.
A 100W incandescent light bulb typically produces around 1600 lumens of light.
It depends on the wattage of the toaster. If the toaster has a wattage greater than 100W, then it will use more electricity than a 100W light bulb. If the toaster has a wattage less than 100W, then the light bulb will use more electricity.
The 100W light bulb is brighter than the 60W light bulb. The difference in brightness is 40 watts.
A 15 Amp breaker should trip when concurrently you connect to it a 15 Ohm toaster (8A), a 0.2 HP motor (2A), three 100W incandescent lamps (2.05A), and a 600 Watt iron (5A).
Power = Energy/time 100W=Energy/360 Seconds Energy = 100/360 Energy ≈ 0.27 Joules
It uses modern technology to give better efficiency. A filament bulb has an incandescent (hot) piece of tungsten wire, which produces light but also heat. A fluorescent bulb uses a different process to produce more light and less heat.
If the fixture was the exact same, and one held a single bulb and one held a double bulb then NO. The light given off bulbs is marked as wattage when you look at the package. So a 100w bulb has less light than two 75w bulbs together, because the two equal 150w.