0
What else can I help you with?
How many 25 amp bulbs fits 105 watt transformer?
To answer this question a voltage must be given. 25 amps drawn by a bulb seem to be on the high side.
Can you use a 250 watt bulb with a 15 amp switch?
Yes, you can use a 250 watt bulb with a 15 amp switch. The switch is rated for up to 15 amps, which is more than enough to handle the power of a 250 watt bulb. Just make sure that the wiring and other components in the circuit can also handle the load.
Can a 350 watt amp power 2 12s?
It depends on the power and impedance rating of the 12-inch speakers. If both speakers are rated for 175 watts and the amp can handle the impedance of the speakers, then the 350 watt amp should be able to power both speakers effectively.
How many 75 watt bulbs can be placed on track lighting with 20 amp breaker?
Theoretically a 75 watt bulb at 120 volts draws .625 amps. You would add the individual currents to determine maximum amperage. That would be 32 bulbs. However, you would then be right on the edge and breaker would likely trip often. You should de-rate to 80% of the breaker rating or 16 amps in this case. That would be 25 bulbs. You should also check to see if there is a maximum amperage or wattage rating on the track. Twenty Five bulbs will create quite a heat source.
How many led c9 bulbs can you put on a 20 amp breaker?
The number of C9 LED bulbs you can put on a 20-amp breaker depends on the wattage of the bulbs. Typically, C9 LED bulbs use about 0.5 watts each. A 20-amp breaker can handle up to 2400 watts (20 amps x 120 volts), so you could theoretically use around 4800 C9 bulbs (2400 watts ÷ 0.5 watts per bulb). However, it’s advisable to limit the load to 80% of the breaker’s capacity for safety, which would allow for about 3840 bulbs.
How many watts are in 100 2.5 volt bulbs?
This question does is not answerable. A watt is a volt times an amp. With out knowing how many amps the bulbs use there is no answer.
Can a 1200 watt amp power a 1300 watt sub?
It's actually a good idea to have a speaker that can handle higher wattage than the amp can produce.
How many 25 amp bulbs fits 105 watt transformer?
To answer this question a voltage must be given. 25 amps drawn by a bulb seem to be on the high side.
Can you use a 250 watt bulb with a 15 amp switch?
Yes, you can use a 250 watt bulb with a 15 amp switch. The switch is rated for up to 15 amps, which is more than enough to handle the power of a 250 watt bulb. Just make sure that the wiring and other components in the circuit can also handle the load.
How many 100 watt bulbs can a 110 volt circuit handle?
To answer this question, you need to know how many amps the circuit that is connected to the light bulb can handle. For home applications with a 15 amp circuit and no other loads connected you get: Power = Current * voltage, Substituting the known information yields: power = 15 amps * 110 volts, which is 1650 watts of total capacity. You have 100 watt bulbs, so: 1650/100 = 16.5 bulbs If your circuit is other than 15 amps, or if there is additional loads on the circuit, you must adjust the current or total capacity accordingly
How many watt in an amp?
That depends on the voltage.
Can a 250 watt amp push 1300 watt subs?
In most cases, the speakers should be able to handle more watts than the amp can deliver. Doing it the other way around will blow out the speakers.
Will a 5000 watt amp wiring kit work well on a 1600 watt amp?
Yes I do not see why not as long as the in line fuse does not exceed the power the amp is pulling. You want the fuse to blow instead of the amp so you need a fuse that can only handle 1600 watts or the equivalent to....
How many amps do light bulbs draw?
Depend on watt and voltage use of light bulbs. You can use this ohm's law formular to calculate the current draw on light bulbs. I (current in amp) = P (watt)/ E (voltage) If 25W light bulb use in 115V AC (resident home) then current draw will be: 25/115 = 0.22A or 22 miliamperes. Hope this help.
Can two 12 alpine type e subs handle an alpine 450 watt mono amp?
yes
How many horsepower is 5 amp 700 watt compresser?
700 watt is 0.93871 horespower
Can 700 watt microwave compatible for 60 amp service?
As long as the voltages match a 60 amp service will handle a 700 watt microwave. The microwave will only draw A = W/V, A = 700/120 = 5.8 amps.
