The formula you are looking for is I = W/E. As you can see the voltage has to be known to answer the question.
Yes, a 30 amp double pole breaker would be suitable for a 4800 watt wall heater. Since watts equals volts multiplied by amps, this wall heater on a 240-volt circuit would draw 20 amps (4800 watts/240 volts), which is less than the 30 amp capacity of the breaker.
20 Amp * 120 Volts = 2400 Watts 2400 Watt * 80% max use = 1920 Watts planned normal usage for a circuit with a 20 Amp breaker.
To calculate the amperage, you can use the formula A = W / V, where A is amperage, W is watts, and V is voltage. Thus, for 4800 watts at 220 volts, the amperage would be 21.82 amps.
The Audiobahn amp A2601Q model has a maximum power output of 2600 watts.
The Alpine V12 MRV-T501 amp has a maximum power output of 500 watts.
4800
Yes, a 30 amp double pole breaker would be suitable for a 4800 watt wall heater. Since watts equals volts multiplied by amps, this wall heater on a 240-volt circuit would draw 20 amps (4800 watts/240 volts), which is less than the 30 amp capacity of the breaker.
about 4800 watt but should not use it 100% so to be safe 4000 watt (80%)
A 20 amp 240 volt circuit can provide 4800 watts.4800 watts / 6 watt per foot = 800 feet.
20 Amp * 120 Volts = 2400 Watts 2400 Watt * 80% max use = 1920 Watts planned normal usage for a circuit with a 20 Amp breaker.
That depends on circuit voltage. 1 watt is equal to 1 volt times 1 amp.
A typical home hot water heater uses 4800 watts. The circuitry connecting to the tanks is a 20 amp breaker with #12 wire for the connection. The tank draws 20 amps. W = A x V = 20 x 240 = 4800 watts. Some industrial hot water tanks can be rated at four times the size of home tanks.
To calculate the amperage, you can use the formula A = W / V, where A is amperage, W is watts, and V is voltage. Thus, for 4800 watts at 220 volts, the amperage would be 21.82 amps.
The Audiobahn amp A2601Q model has a maximum power output of 2600 watts.
The Alpine V12 MRV-T501 amp has a maximum power output of 500 watts.
Current in amps = watts/ voltage in volts. If you have a 240 volt supply, it will draw 4800/240 = 20 amps, so no. This is a very powerful water heater, and would normally be wired into a dedicated circuit, presumably with a 30 amp breaker.
120Watts=1Amp