3000 divided by 240 approx 13 amps?
220 volt
A VA is a volt-ampere, or volt-amp, and a kilo (K) is one thousand. This makes a KVA a kilovolt-ampere, or kilovolt-amp. If we have 1,000 volt-amps, and one volt times one amp is equal to one watt (W), which it is, 1,000 volt-amps is equal to 1,000 watts, or 1 KW. All that said, 1 KVA is equal to 1 KW.Sometimes in an ac system, the watts is less than the volts times the amps, and in that case the watts is equal to the volts times the amps times the power factor. The power factor is less than one. The power factor for a typical electric motor is 0.7, so then there are only 700 watts in a kVA.
The volt is a derived unit of electrical potential. It is equal to joules per coulomb, or kilogram meter squared per ampere second cubed.
Only when the load is purely resistive.
A 'volt ampere' (not 'volt amp'!) is the unit for theapparent power of a load in an a.c. circuit. It is simply the product of the supply voltage and the load current.
One volt is the electric potential required to generate one ampere through one ohm. One volt is the electric potential involved when one ampere generates one watt of power. One volt is one joule per coulomb.
Basically VA is the same as watt. Kilo means thousand, Mega (abbreviatted M) means a million.AnswerThe watt and the volt ampere are used to measure two different quantities and, so, cannot be directly converted one to the other. The watt is used to measure 'true power', while the volt ampere is used to measure 'apparent power'.There is, though, a relationship between the two, as the true power of a load is equal to its apparent power multiplied by the power factor of that load. So, if you know the power factor (which can vary from 0 to 1), then you can determine the true power of a load, if you are given its apparent power.Incidentally, SI doesn't recognise either the volt ampere (apparent power) or reactive volt ampere (reactive power); all forms of 'power' are measured in watts in SI. The volt ampere and the reactive volt ampere are best described as 'traditional' units.
That's like asking how many meters in a liter. Ampere and Volt are two DIFFERENT measurements. Ampere is how much electricity you are using, while volts are how much pressure the electricity is under(Think water). If you want to figure out how many amperes your appliance is using you could use this formula: P=UxI (Watt=Volt x Ampere) or U=RxI(Volt=Resistance x Ampere).
yes you can.
220 volt
770 watts.
kVA is kilo-volt-ampere, which is 1000 x volt x ampere. kVA is the unit of apparent power in AC circuits.
1/1 = 1ohm MR. volta [italian] Determined that it would take 1 volt to pass 1 amp trough a 1 ohm resistor MR ampere [ french] Ditermined that it would take 1 ohm and 1 volt to pass one ampere MR ohms [english] determinaed that for 1 volt and one ampere the resistance must be 1 ohm. mr watts determined that the product of volts x ampere will equal one watt [power]
Among other things, 1 ampere is equal to:1 coulomb / second1 volt / 1 ohmBasically, you can understand 1 ampere as a certain amount of electric charge (1 coulomb) flowing past a certain point per second (although in the SI, the definitions are the other way round: the coulomb is a unit derived from the ampere).
MVA(Mega volt ampere) is the cos component of MW. So one should know the power factor of the system for conversion from MVA to MW.
0.24 ampere
A VA is a volt-ampere, or volt-amp, and a kilo (K) is one thousand. This makes a KVA a kilovolt-ampere, or kilovolt-amp. If we have 1,000 volt-amps, and one volt times one amp is equal to one watt (W), which it is, 1,000 volt-amps is equal to 1,000 watts, or 1 KW. All that said, 1 KVA is equal to 1 KW.Sometimes in an ac system, the watts is less than the volts times the amps, and in that case the watts is equal to the volts times the amps times the power factor. The power factor is less than one. The power factor for a typical electric motor is 0.7, so then there are only 700 watts in a kVA.