0
A transformer does not use, it transforms voltage from one value to another. The output amperage is governed by the connected load. If the load wattage is higher than the wattage rating of the transformer then either the primary or secondary fuse will blow or the transformer will burn up if the fusing is of the wrong sizing. The maximum primary amperage can be found by using the following equation, Amps = Watts/Volts, A = W/E = 600/120 = 5 amps. The same equation is used for the calculating the maximum secondary amperage, A = W/E = 600/12 = 50 amps.
What else can I help you with?
How many amps will a 250 kVA transformer in 220 volts secondary?
To calculate the amperage in the secondary side of a transformer, you can use the formula: Amps = kVA / (Volts x Sqrt(3)). For a 250 kVA transformer with a 220-volt secondary, the amperage will be approximately 660.4 Amps.
How many amps can a volt transformer with a A volt secondary carry?
The number of amps a transformer can carry on its secondary side depends on its power rating (in watts or VA) and the voltage of the secondary winding. You can calculate the current (in amps) using the formula: Amps = Watts / Volts. For example, if you have a 1000 VA transformer with a 10V secondary, it can carry 100 amps (1000 VA / 10V = 100A). Always ensure the transformer is rated for the desired load to avoid overheating or damage.
How do you compute the 2000 watts in 220 volt to how many amps?
watts = volts * amps--> Amps = watts/ volts therefore; 2000/220= 9.09 amps
How many amps are in 200 watts 120 volt?
To find the number of amps in 200 watts at 120 volts, you can use the formula: Amps = Watts / Volts. Therefore, Amps = 200 watts / 120 volts, which equals approximately 1.67 amps.
In a 12 volt solar panel which produces 170 watts equals how many amps?
Watts = Volts x Amps, if you use your algebra you will find that it's approx 14 Amps.
How many amps will a 0.25 kilo volt amp transformer at 120 volts put out?
2.083 amps
7200 volt 25kw transformer how many amps at 240 single phase?
The formula you are looking for is I = W/E. Amps = Watts/Volts.
How many amps will a 250 kVA transformer in 220 volts secondary?
To calculate the amperage in the secondary side of a transformer, you can use the formula: Amps = kVA / (Volts x Sqrt(3)). For a 250 kVA transformer with a 220-volt secondary, the amperage will be approximately 660.4 Amps.
How do I make a 30 amp 250 volt line output only 220 volts at 30 amps?
you get a transformer...
How many amps can a volt transformer with a A volt secondary carry?
The number of amps a transformer can carry on its secondary side depends on its power rating (in watts or VA) and the voltage of the secondary winding. You can calculate the current (in amps) using the formula: Amps = Watts / Volts. For example, if you have a 1000 VA transformer with a 10V secondary, it can carry 100 amps (1000 VA / 10V = 100A). Always ensure the transformer is rated for the desired load to avoid overheating or damage.
How do you size a transformer based on amperage I have a 1 KVA single phase transformer I was told I can only put 4 amps across the secondary. This transformer is 240 volt primary 120 volt secondary?
On a 1kva you have 1000 watts capacity. To fine the current the formula is I = W/E. The secondary side of the transformer has the capacity of 1000/120 = 8.3 amps. In your question you do not put the amps across the secondary you draw amps from it. Using the transformer to its maximum, without overloading it, the primary will be 4.16 amps at 240 volts and the secondary will be 8.33 at 120 volts. <<>> voltage times amps equals wattage
How do you compute the 2000 watts in 220 volt to how many amps?
watts = volts * amps--> Amps = watts/ volts therefore; 2000/220= 9.09 amps
How many amperes in a watt and how many watts in a volt?
Amps, volts and watts are interrelated, but you need to do a little math. Amps * Volts = Watts
How much current can a 50 volt ampere 36volt transformer deliver?
I (Amps) = VA / E (Volts) I = 50 / 36 I = 1.39A Do the math!
How many amps are in 200 watts 120 volt?
To find the number of amps in 200 watts at 120 volts, you can use the formula: Amps = Watts / Volts. Therefore, Amps = 200 watts / 120 volts, which equals approximately 1.67 amps.
What size of 12v transformer will run 600watts?
Amps * Volts = Watts Amps * 12 = 600 600/12 = Amps = 50 amps You would need a reserve capacity, so I'd go somewhere between 60 or 100 Amp rated transformer. Transformers are rated in volt-amps which is usually calculated the same as watts. But the term "watts" technically does not apply to transformers. So you need a 600 volt-amp transformer or, as Redbeard has suggested, you need an 800 or 1000 volt-amp transformer. That's a lot of amps for a 12 volt system so I recommend you double check your requirements. You will need a #2 gauge wire if your requirements are correct.
Does a transformer convert the current from 240 volts to 120 volt?
Transformers are rated in KVA or VA (volt-amps). They transform voltages from one value to another. The current in a transformer is inverse to the voltage. This is why transformers are rated in KVA and smaller ones in VA.
