1.5 ton air condition takes 8 to 12 Amp in Different brands. Mitsibishi..8Amp etc. good cooling of Orient, Gree etc.
The answer you are looking for is on the condensing unit tag. It`s listed as FLA or (full load amps) or RLA (running load amps). Start up amps are appx 5 to 6 times this # but this current is only drawn very briefly. Be sure to add both the compressor and fan motor amperage to get total current draw of the unit. The control power is supplied by the indoor unit so that is not a factor.
The amperage required for a 25-ton air conditioning unit can vary based on its efficiency and design, but generally, it may draw between 60 to 100 amps. To determine the exact amperage, it's important to refer to the manufacturer's specifications or consult the unit's electrical data plate. It's also essential to ensure that the electrical supply and circuit are appropriately sized to handle the load.
To determine the amps for a 1 ton cooling unit at 480 Volts, you would need to know the power rating of the unit in Watts. Once you have the Watts, you can use the formula Amps = Watts/Volts to calculate the amperage.
A 2.5-ton mini split typically has a cooling capacity of about 30,000 BTUs. The amperage draw can vary based on the unit's efficiency and specific model, but it generally ranges from 10 to 15 amps during operation. It's essential to check the manufacturer's specifications for the exact amperage requirements and ensure proper electrical wiring is used for safe operation.
A 16 SEER 3-ton condenser typically draws around 15-20 amps during normal operation. However, the exact amperage can vary depending on factors such as the efficiency of the unit and the specific operating conditions.
You have to check the label on the unit itself. It will give you all the information as far as maximum and minimum amps.
at what voltage? 3 phase? that is a reasonably big unit, you really need to get the correct answer, refer to the manufactures data and get it right.
The answer you are looking for is on the condensing unit tag. It`s listed as FLA or (full load amps) or RLA (running load amps). Start up amps are appx 5 to 6 times this # but this current is only drawn very briefly. Be sure to add both the compressor and fan motor amperage to get total current draw of the unit. The control power is supplied by the indoor unit so that is not a factor.
To determine the amps for a 1 ton cooling unit at 480 Volts, you would need to know the power rating of the unit in Watts. Once you have the Watts, you can use the formula Amps = Watts/Volts to calculate the amperage.
The Amps means the volume of flow of electricity. The Amps depends on its BTU (British Thermal Unit). BTU is the unit to measure the energy that is consumed to perform some Air Conditioner. 12000 BTU Air conditioners uses 5 to 6 Amps. 18000 BTU Air conditioners uses 9 to 10 Amps. 12000 BTU air conditioners also called 1 Ton AIR CONDITIONER and 18000 BTU Air conditioners are called 1.5 Ton and so on. The 2 Ton or 24000 BTU Air conditioners use 15 Amps to work.
A 16 SEER 3-ton condenser typically draws around 15-20 amps during normal operation. However, the exact amperage can vary depending on factors such as the efficiency of the unit and the specific operating conditions.
Number 8. Rated for 40 amps
Whatever the manufacture of the unit recommends. Normally it would be 60 amps.
There is no such thing as a "cubic ton". There is the ton as a unit of mass (1 ton = 1000 kg), and there is the cubic meter, a unit of volume.
PA13NR036-E is a three 930 ton unit.
The gallon is a unit of Volume and the ton is a unit of Mass, so the answer depends on the density of the substance you are measuring.
Yard is a unit of distance.Ton is a unit of mass.