0
What else can I help you with?
What amps should a 5 ton rheem air conditioner pull when it starts?
Read the tag on the condenser, it will be noted as LRA. Be sure to check the LRA for the fan as well and add them together for the total. If it is not listed on the tag it will certainly be listed seperately on both the compressor and the fan motor. LRA = Locked Rotor Amps.
1 ton of cooling at 480 Volts equals how many amps?
To determine the amps for a 1 ton cooling unit at 480 Volts, you would need to know the power rating of the unit in Watts. Once you have the Watts, you can use the formula Amps = Watts/Volts to calculate the amperage.
Can you Replace 3.5 condenser with 4 ton condenser?
That depends on 1) what indoor coil you have, 2) is the ductwork adequate to support 4 tons and 3) if the indoor coil and ductwork are suitable does the blower have the capacity to support 4 tons or 1600 cfm? If so it must be sped up.
How many amps does a 2 ton 14 SEER Trane AC draw at startup and running?
The answer you are looking for is on the condensing unit tag. It`s listed as FLA or (full load amps) or RLA (running load amps). Start up amps are appx 5 to 6 times this # but this current is only drawn very briefly. Be sure to add both the compressor and fan motor amperage to get total current draw of the unit. The control power is supplied by the indoor unit so that is not a factor.
How many amps is 2.5 ton mini split good to?
A 2.5-ton mini split typically has a cooling capacity of about 30,000 BTUs. The amperage draw can vary based on the unit's efficiency and specific model, but it generally ranges from 10 to 15 amps during operation. It's essential to check the manufacturer's specifications for the exact amperage requirements and ensure proper electrical wiring is used for safe operation.
What is the max fuse on 2 ton central air system?
depends on run load amps. on the outside condenser it will tell you on the spec plate max size fuse.
How many tons is a Goodman model GSC130361GA?
3 ton split condenser
What size evaporator will work a 2 ton condenser?
1.5 ton evaporator
Can you install a 3.5 ton condenser on a 3 ton evaporator?
Installing a 3 1/2 ton condenser on a 3 tr evaporator will not function properly. There isn't enough evaporator coil surface area to absorb heat and vaporize refrigerant liquid for its return back to the condenser compressor. What can be done is a 3 ton condenser unit with a 3 1/2 evaporator coil.
How many pound of r22 refrigerant is in 2 ton condenser?
A 2-ton air conditioner typically contains around 4-5 pounds of R22 refrigerant.
What ton rating is ICP model NAC024AKC3 condenser?
2
How many amps does 7.5 ton Air Conditioner draw?
You have to check the label on the unit itself. It will give you all the information as far as maximum and minimum amps.
How many locked rotor amps does a dual phase 4 ton air conditioner pull?
5
What capacity is a Lennox model hs20-411-2p Air conditioner condenser?
3.5 ton NO! its a 3-TON!!!
What tonnage is this lennox condenser unit model hs19-511u-3p?
4
Can a 3.5 ton evaporator be used with a 4 ton condenser?
yes it can. you can you can only downsize a coil by .5 tons or up .the flowrator piston have to be be changed according the the condenser size don't ever try to go more than1/2 ton it would damage the system.
What is the capacity of a Goodman ck36-18 condenser unit?
3 TON
