The amperage draw of an iron typically ranges from 5 to 15 amps, depending on its wattage and design. Most household irons operate between 1000 to 1800 watts, which translates to approximately 8 to 15 amps on a standard 120-volt circuit. Always check the manufacturer's specifications for the exact amperage of a specific model.
100 amps
A deep freezer can draw between 6 to 8 times its running amps on start-up, depending on the model and size of the freezer. For example, if a freezer runs at 6 amps, it could draw between 36 to 48 amps when starting up.
Each 32-watt bulb in a 48-inch fluorescent light typically draws around 0.27 amps. Therefore, a two-bulb setup would draw approximately 0.54 amps in total.
A typical iron pulls around 9-12 amps when in use. It's important to check the specific amp requirement of your iron to ensure it matches the capacity of your electrical circuit.
Always check the nameplate on the device. It will have the serial no., how many hertz it operates at, the voltage, and amperage. Their are different types, so the amperage will differ as well.
100 amps
23
amps like.. amplifiers? it depends on how many speakers you have. or amps like.. current draw? again. depends on your power needs, your power amps... ect
1100 watts or about ten amps then another 3 to 4 amps for turn table light and fan
It is drawing .06 amps.
Amps for an oven are governed by the total wattage of the oven and what the voltage supply to the oven is.
A dishwasher typically draws around 10-12 amps when in operation.
1 AMP
A deep freezer can draw between 6 to 8 times its running amps on start-up, depending on the model and size of the freezer. For example, if a freezer runs at 6 amps, it could draw between 36 to 48 amps when starting up.
It would be at least 250 amps, maybe 300 amps.
Each 32-watt bulb in a 48-inch fluorescent light typically draws around 0.27 amps. Therefore, a two-bulb setup would draw approximately 0.54 amps in total.
It takes 13 amps Varies - but around 10 is a good average.