answersLogoWhite

0

To convert VA to amps for DC, you can use the formula: Amps = VA / Volts. For the given values, the max DC current would be 35VA / 20V = 1.75A. The 18V AC value cannot be directly converted to amps without additional information.

User Avatar

AnswerBot

1y ago

What else can I help you with?

Continue Learning about Natural Sciences

How many watts is 1farad 20volts dc?

1farad 20v dc


What if you use a 20V adaptor for a 12V machine?

Using a 20V adapter for a 12V machine can potentially damage the machine due to overvoltage. The machine might not be able to handle the higher voltage, leading to malfunctions or even permanent damage. It is important to use the correct voltage adapter to ensure the proper functioning and safety of the machine.


A voltage source of 20v is applied across the terminals of a 2.5-ohm rheostat. Calculate the power dissipated in the rheostat?

We can treat the rheostat as a resistor. There is a formula "V squared over R" that gives the power lost. In this case, that would be 400/2.5 or 160 Watts. You could also find the current using Ohm's law: V=IR so I=V/R=8 Amps. You can then find power as P=VI = 20V x 8A = 160 Watts.


Mass air flow meter passat 1.8t part number?

The mass air flow meter for a Passat 1.8T can vary depending on the year of the vehicle. It is recommended to check with a Volkswagen dealership or a reputable auto parts store to ensure you get the correct part number for your specific model and year.


Is there a device that will enable or energize when a voltage range of 20V to 110V is applied that can be used to connect a shower fan to the dimmer switch and activate the fan when the light is on?

Need more info to give you the most usefull answer. However, generically speaking, sounds like what you need is a 120v relay. Put the relay output contacts in series with the fan (aka the load) then wire the relay coil in parallel to the light bulb power. This will make the load come on when the light is powered on. Tip, if the fan is driven by an induction motor (most are, if it has brushes it is NOT an induction motor) then your speed controller will have to be the kind for an inductive load ( NOT the kind for a resistive load, like a lightbulb ). Good luck.AnswerA solid state relay, or SSR should do it for you. SSRs take a broad range of input voltage as you require, and have snubbers to allow them to switch inductive loads such as the fan.

Related Questions

How many watts is 1farad 20volts dc?

1farad 20v dc


How do you factor -20v plus 4v2 - 5y plus vy?

-20v + 4v2 - 5y + vy = 4v2 - 20v + vy - 5y = 4v*(v - 5) + y*(v - 5) = (4v + y)*(v - 5)


If a DIODE or RECTIFIER can handle 1000V and 75Amps is it also safe to run the same diode at 20V and 300Amps. The first is 75000Watts and the second is only 6000Watts in theory it should work..?

No, the diode is physically rated to only 75 Amps, at voltages up to 1000V. Its not a power factor thing, the top limit is 75 Amps.


When two 1W zener diodes are connected parallel will these increase wattage?

yes if you add two 20V/1W zener in parallel you will arrive 20V/2W


What cars have a 4age 20v motor?

AE86's!


How do you get past level26I On 100 floors?

Put the 1V and 5V to the x2.Put the 1V and 20V to the x3.Put the 5V and 20V to the x1.See related link for screenshots.


What does a 20v marking on a device indicate?

rated for 20 volts?


What does a 20v markings on a device indicate?

rated for 20 volts?


What is the firing order for Fiat 20v coupe?

The firing order of the 5 cylinder 2.0 litre 20V Coupé is: 1-2-4-5-3 (the turbo version is the same).


How do you beat level 26 in 100 Floors?

Put the 1V and 5V to the x2.Put the 1V and 20V to the x3.Put the 5V and 20V to the x1.See related link for screenshots.


How do you factor 96-20V V2?

(v - 8)(v - 12)


Can a 20v lithium battery work on a 18.0 lithium-Ion Circular Saw?

i assume that you mean 18.0 volt saw. If so then yes it will work just when you are cutting, it may not cut as well as 20v will.