answersLogoWhite

0

Volts times amps equals watts, so the question is - what times 480 makes 10,000, and the answer is 10,000 divided by 480. That is 10,000 divided by 500 and then increased by 4% which is 20.8 amps.

User Avatar

Wiki User

11y ago

What else can I help you with?

Related Questions

How many amps does a 240 volt 1500 watt electric base board heater use?

To calculate the amperage for a 240-volt, 1500-watt electric baseboard heater, you can use the formula: Amps = Watts / Volts. For this heater, it would be 1500 watts / 240 volts, which equals 6.25 amps. Therefore, the heater uses approximately 6.25 amps.


How many amps will an electric heater use if 440 volts are applied to it and the resistance is measured at 80ohms?

The formula you are looking for is I = E/R. Amps = Volts/Resistance.


How many amperes use an electric heater?

The amperage of an electric heater depends on its power rating in watts and the voltage it operates on. To determine the amperage, divide the wattage by the voltage (Amperes = Watts / Volts). For example, a 1500 watt electric heater running on 120 volts would use 12.5 amperes (1500 watts / 120 volts = 12.5 A).


Can you run one 1500 watt heater on a 125V- 15A 60Hz power strip?

Yes, a 1500 watt heater operating on 120 volts has an amperage of A = W/V. Amps = Watts/Volts = 1500/120 = 12.5 amps. It is not a recommended practice to do so.


How many watts of power are used by a heater operating at 460 volts and drawing 5 amps?

The power used by the heater can be calculated using the formula: Power = Voltage x Current. In this case, the power would be 460 volts x 5 amps = 2300 watts.


How many amps does a 2000 watt heater draw at 240 volts?

Amps * Volts = Watts So, Watts / Volts = Amps 2000 / 240 = 8.333 Amps You should run the circuit on a two pole 15 Amp breaker, using 14 AWG, 2 conductor (plus ground) wire, just so you have a little safety factor in the circuit size.


What is the number of AMPS for a 240V 2400 watt water heater?

Watts = Amps x Volts for a resistive load like a water heater.


An alternator provides 20 A of a peak current at 100 volts peak AC to a resistive electric heater How much heating power is delivered to the load?

Watts = Amps * Volts Watts = 20 amps * 100 Volts Watts = 2000 2,000 Watts or 2k Watts


An alternator provides 20 A of Peak current at 100 Volts Peak AC to a resistive electric heater. How much heating power is delivered to the load?

Watts = Amps * Volts Watts = 20 amps * 100 Volts Watts = 2000 2,000 Watts or 2k Watts


How many amps in 70 watts?

To answer this you have to know how many volts will be used. If you know the voltage then you can calculate the current by dividing voltage into wattage. For example; an electric heater rated at 700 watts when plugged into a 115 v outlet will draw 700/115 = 6.08 amps of current.


What is the kilowatt output of an electric heater that has an ampere draw of 50 a and a voltage source of 208 volts?

The watts is the volts times the amps So 208 x 50 watts, or 10.4 kW.


How many amps does a 750 watt 120 volt heater draw?

To find the current in amps that a 750 watt, 120 volt heater draws, you can use the formula: Amps = Watts / Volts. So, 750 watts divided by 120 volts equals 6.25 amps. Therefore, the heater draws approximately 6.25 amps.