How many gallons of water can a 30 ft by 30 ft and 1 ft deep hold?

Answer 1

The formula for figuring out the amount of gallons is on the back of pool chemical containers. I am not sure what the formula is for an oval.

Check here: http://www.poolspa.com/calculator/

If the pool floor slopes uniformly from end to end, the average depth can be found by adding the deepest and shallowest depth measurements and dividing the results by two. If the pool's dimensions are in feet, the volume will be in cubic feet. One cubic foot of water equals 7.5 gallons.

Example: The water volume of a pool 60 ft. long, 30 ft. wide and that slopes in depth from 3 ft. to 10 ft. is as follows: 30 x 60 x ((10 + 3)/2) = 11,700 cubic ft. of water 11,700 x 7.5 = 87,750 gallons

Answer 2

To calculate you would need the height of the pool. (pi)(radius2)(height)/231 = gallons

Answer 3

Genrally speaking water takes up 7.4 cubic foot per gallon; given that 30x30x1 is 900 cubic feet, then around 6,660 gallons.

Answer 4

A 30 ft by 30 ft area with a depth of 1 ft can hold about 900 cubic feet of water. Since 1 cubic foot is equal to about 7.48 gallons, this means the area can hold around 6,732 gallons of water.

Answer 5

12,000

Answer 6

25000 gallons