It is 0.000039 inches, approx.
To convert inches of water column to volume, you would need to know the area over which the water column is acting. Once you have the area, you can calculate the volume by multiplying the inches of water column by the area in square inches. The formula would be: Volume = Inches of water column * Area.
14 inches equals one pound of natural gas pressure
The density of mercury is 13.534, compared to '1' for water. So the water columnis 13.534 times as high as the mercury column at the same pressure.(30 inches of water) x (25.4 millimeters/inch) / 13.534 = 56.3 millimeters of mercury
Thangaj
On average, 1 inch of snow is equivalent to about 0.1 inches of water. Therefore, 24 inches of snow would be roughly equal to 2.4 inches of water. This ratio can vary depending on factors such as temperature and snow density.
To convert psi (pounds per square inch) to inches of water column, you can use the conversion factor that 1 psi is approximately equal to 27.7 inches of water column. Therefore, 5 psi is equal to about 5 x 27.7, which equals approximately 138.5 inches of water column.
To convert inches of water column to volume, you would need to know the area over which the water column is acting. Once you have the area, you can calculate the volume by multiplying the inches of water column by the area in square inches. The formula would be: Volume = Inches of water column * Area.
Multiply by 0.036 http://www.enercongroup.com/conversion_factors.htm One PSI is equal to 27.7 inches of water column
0.5 psig is equivalent to 13.8 inches of water column.
1 in of water is equal to 2.49082 mBar. Just multiply by 4
One pound per square inch (psi) is approximately equal to 27.68 inches of water column (inH2O). This conversion is based on the density of water and the gravitational force acting on it. Therefore, if you have a pressure of 1 psi, it corresponds to about 27.68 inches of water height.
Wet Microns! A Micron is a commonly used, but theoretically defunct way of say a millionth of a metre or micrometre (The spelling is meter or micrometer in the U.S.). So asking "what are microns in water?" is like asking "What are inches in water?"
0.25 psig = 413.7 inches of water column
10 inches of water column equals to how much gas pressure?
14 inches equals one pound of natural gas pressure
1 psig is equivalent to 51.71 mm (2 in) of mercury or to approx 700 mm (27.5 in) of water. Technically one cannot have apsig. Psig represents a pressure reading of the pressure above normal atmospheric pressure of 14.7 psi. You mean a psi.
35 inches of water is equivalent to approximately 1.27 psi. This can be calculated by dividing the height of the water column (35 inches) by the conversion factor (27.71 inches of water column per psi).