100 and 150 kg of nails is what is needed for the 100 square metre.
C.S density is 7.85 kg/m^3 it is wrong. the correct density for c.s. is 7.85 kg/dm3 the CS density is normally given as 7.85gm/cm^3 or 7850 kg/m^3
1 mt = 1000 kg. You now have all the information required to work out, for yourself, the answer to this and similar questions.
1 kilogram = 1000 grams. You now have all the information required to work out, for yourself, the answer to this and similar questions.
To calculate the energy required to vaporize 2 kg of aluminum, we use the heat of vaporization of aluminum, which is approximately 10,900 J/kg. Therefore, the energy required is 2 kg × 10,900 J/kg = 21,800 J, or 21.8 kJ. This is the amount of energy needed to convert 2 kg of aluminum from a liquid to a vapor at its boiling point.
nearly 10 kg of manganese is required to manufacture one tonne of steel
1000 kg
250 kg
7600 kg
200 kg of steel. Steel is denser than aluminum (so, more stuff to heat in 200 kg of steel than in 200 kg of aluminum), and 200 kg is twice as much as 100 kg (so, more stuff to heat in 200 kg of steel than in 100 kg.)
well , reinforcement steel required for slab is nearly 0.7 to 0.8% of the volume of concrete so if concrete is 1 cum then steel will be 1*0.7/100 =0.007 but density of steel is 7850 kg/ cum so 0.007*7850=54.95 say 55 kg per cum so steel required to reinforce 1 cum concrete for slab is approximately 55 kgs.
5 kilograms = 11.0231131 pounds.
Steel is not a standard alloy: its composition is varied to meet different requirements. As a result its density varies. A cubic metre of steel will have a mass of between 7750 kg and 8050 kg.
The amount of steel reinforcement in a concrete retaining wall is typically measured in terms of kilograms per cubic meter (kg/m³). The exact quantity of steel reinforcement required can vary depending on factors such as the design specifications, load requirements, and the dimensions of the retaining wall. In general, a common range for steel reinforcement in concrete retaining walls is between 60 to 150 kg/m³, but it is crucial to consult with a structural engineer or refer to specific design guidelines for an accurate calculation.
To determine how many lengths of steel can fit in a ton, you need to know the density of the steel and the specific weight of the steel per meter. Generally, rough steel weighs approximately 7850 kg/m³. For 16mm diameter rough steel, a typical weight is about 1.58 kg/m, allowing roughly 634 lengths in a ton. For 10mm diameter rough steel, it weighs about 0.62 kg/m, resulting in approximately 1,607 lengths in a ton.
What rupees of per kg high speed steel
The amount of steel required for a lintel typically depends on its design, load-bearing requirements, and local building codes. Generally, for a standard lintel, you might use around 0.1 to 0.15 kg of steel per square foot. Therefore, for a 100 square foot lintel, you would need approximately 10 to 15 kg of steel. It's important to consult with a structural engineer for precise calculations based on specific conditions.