0
What else can I help you with?
How many watts does it take to heat 200 square feet?
If you tell us the starting temperature and the finishing temperature and the specific heat of the material this 200 sq ft is made of then we'd have a chance of answering this one. But let's say that you're talking about a room (you didn't say you were but let's assume this), then a rule of thumb calculation, where the assumption is made that it takes 10 watts to heat a square foot of room, would show that you'd need 2,000 watts.
How many tons of a c required for 950 kw electric panel room?
Just make sure it's well ventilated, with fans if necessary, to take away any heat generated, otherwise there is no need for a/c if it is a room without people in it.
Use more heat with window open if thermostat in another room?
Even if the thermostat is in another room, you are releasing some heat out that open window. This means that the furnace (or boiler) will have to run longer to make up for that loss of heat, and the room in which the thermostat is located will take longer to come up to the set point of the thermostat.The HVAC Veteran
How long does a homemade lava lamp take to heat up?
It may take 30-60 minutes for the homemade lava lamp to heat up and start bubbling. This can vary depending on the temperature of the room and the specific ingredients used in the lamp.
Can orange peels absorb heat?
Yes - like pretty much all matter, orange peels can absorb heat. If you take an orange out of the refrigerator and leave it on the counter for a few hours you will notice that it is no longer cold; the peel (and the rest of the orange) absorbed heat from the counter and the air in the room.
How many 12inch by 12inch tiles will it take for a 120 square foot room?
120
How many 18 inch tiles will it take to tile a 1500 foot room?
667 of them. Get 733 to be safe.
How many 18 inch tiles will it take to tile a 11 x 36 foot room?
176 tiles
How many 1 foot tiles would it take to put along each side of a room 9 foot by 9 foot?
108 because you multiply 9 by 12 inches from th foot and get 108
What size room will a 12000 btu heat pump heat and cool?
usually around 400sq. ft room give or take
How many 12x12 tiles for a 3x12 room?
A 3x12 room is 36 square feet. This means that to fill the floor in the 3x12 room, it will take 36 tiles that are each 1 square foot (12x12) in size.
If a room is 400 square feet how many 2 foot by 2 foot tiles would it take to cover it?
A tile measuring 2 foot by two foot (which, incidentally, is an unusually large tile) has an area of 4 square feet, so it would take 100 such tiles to cover a 400 square foot floor.
How many BTU's does it take to hear a 500 sq ft room?
To heat a 500 sq ft room, you generally need about 20 to 30 BTUs per square foot, depending on factors like insulation, ceiling height, and climate. This means you would require approximately 10,000 to 15,000 BTUs to effectively heat the room. It's important to assess specific conditions to determine the exact BTU requirement for optimal heating.
How many 12 by 12 inch tiles will it take to tile a 70 sq foot room?
70 tiles. Add an additional 10% for cuts.
Why does bread take longer to rise in a cool room then in a warm room?
because the yeast reacts to heat.
How many watts does it take to heat 200 square feet?
If you tell us the starting temperature and the finishing temperature and the specific heat of the material this 200 sq ft is made of then we'd have a chance of answering this one. But let's say that you're talking about a room (you didn't say you were but let's assume this), then a rule of thumb calculation, where the assumption is made that it takes 10 watts to heat a square foot of room, would show that you'd need 2,000 watts.
How many 6 inch tiles would you need to cover an 8 foot room?
Take the are of the room and divide it by 6 and there's your answer.If the room is 8 square feet you would need 32 tiles.If the room is 8 by 8 feet you would need 256 tiles.
