0
What else can I help you with?
What is the measurements of a shuttlecock in cm?
4(a) General Design4(a)(i) The shuttle shall have 14 to 16 feathers fixed in the base. 4(a)(ii) The feathers can have a variable length from 64mm to 70mm (2 1/2 inches to 2 3/4 inches), but in each shuttle they shall be the same length when measured from the tip to the top of the base. 4(a)(iii) The tips of the feathers shall form a circle with a diameter within a range of 58mm to 68mm (2 1/4 inches to 2 5/8 inches). 4(a)(iv) The feathers shall be fastened firmly with thread or other suitable material. 4(a)(v) The base shall be: -25mm to 28mm (1 inch to 1 1/8 inches) in diameter -rounded on the bottom. 4(b) Weight The shuttle shall weigh from 4.74 to 5.50 grams (73 to 85 grains).
When was He Shall Thunder in the Sky created?
He Shall Thunder in the Sky was created in 2000.
In the meadow we shall build and pretend that he is?
real
What is the detailed procedure of hot dip galvanizing and electro galvanizing and acid compounds used in it?
GALVANISING For use in construction at coastal areas it shall be required for galvanizing the Cross arms and Pole top brackets as following : All galvanizing shall be carried out by the hot dip process, in accordance with Specification IS 2629. However, high tensile steel nuts, bolts and spring washer shall be electro galvanized to Service Condition 4. The zinc coating shall be smooth, continuous and uniform. It shall be free from acid spot and shall not scale, blister or be removable by handling or packing. There shall be no impurities in the zinc or additives to the galvanic bath which could have a detrimental effect on the durability of the zinc coating. Before picking, all welding, drilling, cutting, grinding and other finishing operations must be completed and all grease, paints, varnish, oil, welding slag and other foreign matter completely removed. All protuberances which would affect the life of galvanizing shall also be removed. The weight of zinc deposited shall be in accordance with that stated in Standard IS 2629 and shall not less than 0.61kg/m² with a minimum thickness of 86 microns for items of thickness more than 5mm, 0.46kg/m² (64 microns) for items of thickness between 2mm and 5mm and 0.33kg/m² (47 microns) for items less than 2mm thick. Parts shall not be galvanized if their shapes are such that the pickling solutions cannot be removed with certainty or if galvanizing would be unsatisfactory or if their mechanical strength would be reduced. Surfaces in contact with oil shall not be galvanized unless they are subsequently coated with an oil resistant varnish or paint. In the event of damage to the galvanizing the method used for repair shall be subject to the approval of the Project Manager or that of his representative. Repair of galvanizing on site will generally not be permitted. The threads of all galvanized bolts and screwed rods shall be cleared of spelter by spinning or brushing. A die shall not be used for cleaning the threads unless specifically approved by the Project Manager. All nuts shall be galvanized. The threads of nuts shall be cleaned with a tap and the threads oiled. Partial immersion of the work shall not be permitted and the galvanizing tank must therefore be sufficiently large to permit galvanizing to be carried out by one immersion. After galvanizing no drilling or welding shall be performed on the galvanized parts of the equipment excepting that nuts may be threaded after galvanizing. To avoid the formation of white rust galvanized materials shall be stacked during transport and stored in such a manner as to permit adequate ventilation. Sodium dichromate treatment shall be provided to avoid formation of white rust after hot dip galvanization.
Name chemical reactions in the house?
ok then i shall George Fred
What three basic questions do economic systems address?
Economists also study how economic systems address three basic questions: What shall we produce?; How shall we produce it?; For whom shall we produce it?
What shall never be required as qualification to any office?
religious test
What shall never be required as a qualifcation to any office in the US?
Religious test -"but no religious Test shall ever be required as a Qualification to any Office or public Trust under the United States." Article VI, Paragraph 3
Which amendment eighth?
Excessive bail shall not be required, nor excessive fines imposed,......
Difference between will and would?
"Will" conveys an intent to do something. For contracts, the word "will" is replaced with "shall" to convey the meaning that it is something that is required. "The builder shall deliver on the 1st."
Shall or will?
Generally speaking, we properly use shall for the auxiliary future in the first person, and will for the other persons. When shall is used with the other persons, it conveys necessity as well as futurity. For example, "He will appear" simply means that he will appear, but "He shall appear" means "It is required that he appear at a future time."
What does article VI say about administering religious tests to candidates?
no religious tests shall ever be required
What said Excessive bail shall not be required nor cruel and unusual punishments inflicted?
The 8th amendment
What majority in congress is required to introduce a constitutional amendment?
The Constitution states that 'The Congress, whenever two-thirds of both houses shall deem it necessary, shall propose amendments to this Constitution'.
What qualifications for holding any public office is forbidden?
No religious test shall ever be required as a qualification to any office or public trust under the United States.
What action is required when two aircraft of the same category converge but not head-on?
The aircraft on the left shall give way.
How big do residential stair landings need to be with a sliding door?
From the IRC 2003 Code: 311.4.3 Landings at doors. There shall be a floor or landing on each side of each exterior door. Exception: Where a stairway of two or fewer risers is located on the exterior side of a door, other than the required exit door, a landing is not required for the exterior side of the door he floor or landing at the exit door required by Section R311.4.1 shall not be more than 1.5 inches (38 mm) lower than the top of the threshold. The floor or landing at exterior doors other than the exit door required by Section R311.4.1 shall not be required to comply with this requirement but shall have a rise no greater than that permitted in Section R311.5.3. Exception: The landing at an exterior doorway shall not be more than 7 3/4 inches (196 mm) below the top of the threshold, provided the door, other than an exterior storm or screen door does not swing over the landing. The width of each landing shall not be less than the door served. Every landing shall have a minimum dimension of 36 inches (914 mm) measured in the direction of travel.
