Neptune has a diameter of approximately 49,244 kilometers. To convert this measurement to millimeters, you multiply by 1,000, resulting in a diameter of about 49,244,000 millimeters.
Neptune has a diameter of about 49,244 kilometers. So, approximately 49,244 diameters of Neptune would equal one kilometer.
A .45 caliber bullet typically measures 11.43 millimeters in diameter.
Neptune's diameter is 49,528 kilometers, while Mercury's is 3,473 kilometers. Neptune's diameter is 14 times the size of Mercury's.
A dime has a diameter of 1.8 centimeters. This is equivalent to 18 millimeters.
Mercury can fit into Neptune approximately 18,000 times by volume. Neptune has a much larger diameter and overall volume compared to Mercury, with Neptune being about 3.9 times wider than Mercury. However, this is a rough estimate, as actual fitting would depend on the precise calculations of their respective volumes.
Neptune has a diameter of about 49,244 kilometers. So, approximately 49,244 diameters of Neptune would equal one kilometer.
21.21 millimeters wide
To convert the diameter from millimeters to thousands, you can divide the diameter in millimeters by 1,000. In this case, 20 mm is equal to 0.02 thousands.
30,800 miles
30.4mm
A .45 caliber bullet typically measures 11.43 millimeters in diameter.
A millimetre is a unit of measurement of length. A diameter is not. The question, therefore, makes no sense.
Neptune's diameter is 49,528 kilometers, while Mercury's is 3,473 kilometers. Neptune's diameter is 14 times the size of Mercury's.
A dime has a diameter of 1.8 centimeters. This is equivalent to 18 millimeters.
A single dime has a diameter of approximately 17.91 millimeters. Therefore, 34 dimes would measure about 608.94 millimeters in total length when lined up in a row (34 dimes x 17.91 mm per dime).
Raindrops can vary in size, but on average they are about 1 to 2 millimeters in diameter. Some larger raindrops may be 4 to 6 millimeters in diameter, while smaller raindrops can be less than 1 millimeter in diameter.
You need to measure the diameter of the cent. Then divide the diameter in half to get the radius. The formula for area of a circle = ?r2, where ? is 3.14159. I think you would be better off using millimeters or centimeters instead of ft.