It depends where...
To convert 380N to pounds of force, divide by 4.448 to get approximately 85.3 pounds of force.
There are 1,280 psi in 5 pounds of force.
The "G" is not a unit of force. If it were, then everybody would have the same weight, since the value of gravity is virtually the same everywhere on earth.
The question was going along so nicely there, until it got to the very end, and thenshot itself in the foot with "foot pounds"."Foot pounds" is a torque, not a force.-- If you apply 50 pounds of force at the end of the crank, that 50 pounds becomes175 pounds of force at the surface of the 8-inch cylinder, because the mechanicaladvantage of the crank/cylinder arrangement is 28/8 = 3.5 .-- If you apply 50 foot-pounds of torque at the end of the crank, then the force is50 ft-lb/28 inches = 50 lb x 12 in/28 in = 21 3/7 pounds .Now, the same mechanical advantage of 3.5 gives you 75 pounds at the hub.What a difference a unit makes !
8 kg equates to approximately 17.6 pounds.
To convert 380N to pounds of force, divide by 4.448 to get approximately 85.3 pounds of force.
In one newton there is 0.224808943 pounds of force, and in a pound of force there are 4.44822162 newtons of force. Note that a Newton is a unit of force, not mass. actually a newton is 0.00571014716277 pounds of force!!
1 kip is equal to 1000 pounds-force. Foot-pounds is a unit of torque, not force. To convert kips to foot-pounds, you need to know the length of the lever arm in feet that the force is acting on.
1 kilonewton = 224.81 pounds force.
The main force would be the force of gravity, which is 250 pounds in this case.
1 kilonewton = 224.81 pounds of force.
There are 1,280 psi in 5 pounds of force.
28 kilonewtons = 6,294.65 pounds of force.
.525 kilonewtons = 118.025 pounds of force.
They would weigh approx 84,600 pounds-force.
23,000 newtons = 5,170 pounds force (rounded)
150,000 pounds force = 667,258 Newtons. (rounded)