There is no direct conversion between RPM (revolutions per minute) and watts as they are measurements of different quantities. RPM measures rotational speed, while watts measure power. The power output in watts of a rotating object would depend on factors such as its torque and the load it is driving.
To determine the wattage of a 24-volt motor running at 5000 RPM, you need to know its torque output, as power (in watts) is calculated using the formula: Power (W) = Voltage (V) × Current (A). If the motor's current draw is known, you can directly calculate the wattage. Without that information, it's impossible to provide an exact wattage. Generally, small motors of this specification might range from a few hundred to a few thousand watts, depending on their design and application.
100 watt
There are 1,000 watts in a kilowatt (kW).
It is 2400 million watts.
2,000 kw is 2,000 kilo watts is 2,000,000 watts
Mixers are usually measured in watts and rpm's. Watts refer to the power, or the mixer's ability to avoid getting "bogged down". RPM's are needed for speed, such as when whipping cream.
To calculate watts when cycling, you multiply your current power output in watts by your pedaling cadence in revolutions per minute (RPM). This formula helps you measure the amount of energy you are producing while cycling.
To determine the wattage of a 24-volt motor running at 5000 RPM, you need to know its torque output, as power (in watts) is calculated using the formula: Power (W) = Voltage (V) × Current (A). If the motor's current draw is known, you can directly calculate the wattage. Without that information, it's impossible to provide an exact wattage. Generally, small motors of this specification might range from a few hundred to a few thousand watts, depending on their design and application.
1hp = 746 watts, so 2hp would be 1492 watts, or almost 1.5 kw kWh does not convert to hp, as kWh has a time component.
100wats
210,000,000 watts
132 watts
1540 watts
If it's a dc generator it would produce 2/5 of the voltage at the lower speed, and another factor of 2/5 less if the armature supplies the field winding. So the voltage output could be 16% of the rated voltage. The current limit would be the same, so the output would be 71 watts maximum.
Power in horsepower (hp) can be calculated using the formula: [ \text{hp} = \frac{\text{Torque (lb-ft)} \times \text{RPM}}{5252} ] This formula relates torque (in pound-feet) and rotational speed (in revolutions per minute, RPM) to derive horsepower. Alternatively, for electrical power, it can be calculated as: [ \text{hp} = \frac{\text{Watts}}{746} ] where Watts is the power in watts.
25000 watts
95,000 watts.