0
What else can I help you with?
Can i use led lamp 120 volt in 220 volt?
No, a 120-volt LED lamp should not be used in a 220-volt socket, as it can cause the lamp to fail or even pose a fire hazard. The voltage difference can damage the lamp's internal components. If you need to use a 120-volt lamp in a 220-volt environment, consider using a step-down transformer or a voltage converter designed for this purpose. Always ensure compatibility to avoid safety risks.
Will a 117 volt led bulb work in a 110 volt circuit?
It should work okay.
Can a 15 volt transformer replace a 12 volt transformer for LED aquarium light?
A 15-volt transformer can potentially replace a 12-volt transformer for an LED aquarium light, but it may not be advisable. LEDs are typically designed to operate at specific voltage levels, and using a higher voltage could lead to overheating, reduced lifespan, or even damage to the LEDs. It's best to use a transformer that matches the voltage rating specified by the LED manufacturer to ensure safe and optimal performance.
How many amps does a led light draw?
Depends on the size of the LED light and the voltage applied. An example is an LED 24 volt globe light that pulls 8 watts which draw 0.333333 amps. Take an LED 120 volt light bulb draws 12 watts and will pull 0.1 amps. The same bulb at 240 volts wil draw 0.05 amps. it really depends on the watts and voltage applied. An average would be about 0.1 amps.
What is the resistance value if you connect the 3 volts led at 220 volts?
To calculate the resistance needed, you can use Ohm's Law: R = V^2 / P, where R is resistance, V is voltage, and P is power. In this case, R = (3^2) / 3 = 3 ohms. You would need a 3-ohm resistor to safely connect a 3-volt LED to a 220-volt source.
Why do you need 330 ohm resistor for LED?
Generally 330ohm resistors are used to power a typical 3 volt LED if the source voltage is 5v
Which resistor is connect 1.5 volt led to series 220v ac?
Typically, a 100 ohm resistor is used to connect a 1.5 volt led to a series 220v ac adapter. Many LEDs can be connected into a string using the resistors.
Will a 117 volt led bulb work in a 110 volt circuit?
It should work okay.
How many amps does a 120 volt AC 8 watt led bulb draw?
It is drawing .06 amps.
12 Volt DC Question. Will a 12 Volt 2.9 amp fully charged battery harm an LED light that cnsumes 2400 watts of energy if directly connected?
Not enough information provided. You really need to check the LED light's voltage rating. If the voltage of the battery is much higher than the LED's voltage rating, it will probably get harmed.
Please HELP How do you connect a small LED light to a 3 volt watch battery with the battery one and a half feet away?
Try wires. You will also need a resistor. You also need to know that a watch battery is not rated to carry the current load of a typical LED.
How long will it take to drain a 12 volt battery with a 3.2 volt 100 ma led?
This will depend on the size of the 12 v battery.
Using an LED and a nine volt battery what resistor should you use?
34Kohms
How many amps does a led light draw?
Depends on the size of the LED light and the voltage applied. An example is an LED 24 volt globe light that pulls 8 watts which draw 0.333333 amps. Take an LED 120 volt light bulb draws 12 watts and will pull 0.1 amps. The same bulb at 240 volts wil draw 0.05 amps. it really depends on the watts and voltage applied. An average would be about 0.1 amps.
What power adapter do you need to use for 7.2 watt 12 volt led lighting unit?
For a 7.2-watt, 12-volt LED lighting unit, you need a power adapter that provides 12 volts and at least 0.6 amps (since 7.2 watts divided by 12 volts equals 0.6 amps). It's advisable to choose an adapter with a slightly higher current rating, such as 1 amp, to ensure proper operation and avoid overloading the adapter. Make sure the adapter has the correct connector type and polarity to match your LED lighting unit.
How many volts does 3 red led need to light?
6
What are the best type of puck lights to buy and what size?
I recommend 120 volt 20 watt halogen if you are on a budget. If you can afford them 120 volt LED is even better and will last for years.
