IF the manufacturer did not list a rating on the switch for DC then the switch is not approved for the use on DC. Switches rated for AC will not last long used on DC because they do not have the ability to exstinguish the arc across the contacts present with DC.
Look on the label of the product itself, I have seen 6 Volts and 7.2 Volts on Swiffers, the label will tell you for sure. For example my unit needs a 1-SG1700-000 adapter, which is a 7.2 volts DC with positive polarity on the plug. You can use a multipurpose adapter that you can set the voltage yourself and set the polarity as well. They go for about $5-$10 in most electronic stores, even in many department stores.
To calculate the amperage, we can use the formula: Amps = Watts / Volts. In this case, it would be 70 watts / 13.8 volts ≈ 5.07 amps. So, with 70 watts and a voltage of 13.8 volts DC, the amperage would be approximately 5.07 amps.
Since power = voltage * current we have current=power/voltage so 3500 watts/230 volts = about 15.218 amperes in a heater using a resistance to generate heat. This should be valid even though the "230 vac" indicates that it is an AC circuit and not a DC circuit.
FireWire, also known as IEEE 1394, typically supports a voltage of 12 volts DC for its power delivery. Some devices may also operate at 6 volts or 5 volts depending on their requirements. FireWire can supply power to connected devices while facilitating data transfer, making it versatile for various applications.
12 volts DC
12 volts DC.
13.5-16 volts DC
Volts direct current eg battery As opossd to Vac wich is volts altinating current eg mains supply
Both are equally as dangerous, as 250-volts is more than enough to exceed the .1 amp (100 milli-amps) needed to cause your heart to stop beating correctly. DC electrical current cause more sever burning than AC current does, but when the voltage is as high as 250 V, it will not matter much which type of current it is... both have the potential to kill you.
12 volts DC.
12 volts DC.
the answer is dc volts are rectified from ac volts and the amperage will be the same unless you account for the slight drop from the rectifier. dc volts from a battery have no relationship to ac volts. you can derive ac volts from a dc source using an inverter.
A DC motor can be built to operate on any voltage.
13.5 to 16 volts DC.
12 volts DC.
12 volts DC.