It's important to use the correct symbols for units of measurement. There is no such symbol as 'mw' -so you either mean 'mW' (milliwatts) or 'MW' (megawatts), which are significantly different!
The watt is the SI unit for power. Voltage (potential difference) is measured in volts. Power and voltage are two completely different quantities, so it doesn't make sense to ask 'How much voltage is 5 mW (or MW)?'
Watts is found by multiplying the volts by the amps. Normally a supply is provided at a fixed voltage, and the amount of current that is drawn depends on how many watts the equpiment requires.
The power used by the heater can be calculated using the formula: Power = Voltage x Current. In this case, the power would be 460 volts x 5 amps = 2300 watts.
Using the formula Power(P) = Voltage(V) * Current(I) 5 = 10 * I I = .5 amps Current is .5 amps
To determine how many amps are in 115 volts, you need to know the power (in watts) being used. The relationship between volts, amps, and watts is given by the formula: Watts = Volts × Amps. Therefore, to find the amps, you can rearrange the formula: Amps = Watts / Volts. For example, if you have a device that uses 1150 watts, you would have 10 amps at 115 volts (1150 watts ÷ 115 volts = 10 amps).
The formula to calculate the relationship between amps, volts and watts is Volts X Amps = Watts or Volts = Watts / Amps or Amps = Watts / Volts therefore; 200 Watts divided by 1.95 Amps is 102.5641 Volts.
5 volts
It depends on the current in amps. The watts would be equal to 5 times the current, because watts equals amps times volts.
No, 5 watts is not equal to 1 amp. The relationship between watts, volts, and amps is defined by the formula: Watts = Volts × Amps. To find the current in amps when you have 5 watts and a specific voltage, you can rearrange the formula: Amps = Watts / Volts. For example, if the voltage is 5 volts, then 5 watts would equal 1 amp (5W = 5V × 1A).
It depends on how many Amps (current) are applied to the voltage. Watt = Volts x Amps. e.g. 12 volts @ 5 amps = 60 watts
volts times amps = watts
Watts is found by multiplying the volts by the amps. Normally a supply is provided at a fixed voltage, and the amount of current that is drawn depends on how many watts the equpiment requires.
The power used by the heater can be calculated using the formula: Power = Voltage x Current. In this case, the power would be 460 volts x 5 amps = 2300 watts.
Watts and Volts are two distinct types of measurement.
600 This depends on the voltage Voltage x Amps = Watts ex. At 120 volts 5 amps WILL BE 600 watts But at 110 Volts (Some house voltage), it will be 550 watts And at 277 Volt (commercial-Industrial Voltage), it would be 1385 Watts If you know Watts (Like a 75w Incandescent Lamp) and the Voltage: Watts / Volts = Amps So 75w / 120v = 0.625a The last would be Watts / Amps = Volts 600w / 5a = 120v
Amps, volts and watts are interrelated, but you need to do a little math. Amps * Volts = Watts
Using the formula Power(P) = Voltage(V) * Current(I) 5 = 10 * I I = .5 amps Current is .5 amps
Zero. Watts is the product of Amps x Volts. As you can see an amperage value is needed. Voltage = Watts/Amps. Volts = 200/? 20 volts