A motion sensor typically consumes very little power, usually in the range of 0.5 to 2 watts, depending on the specific model and features it offers. This low power consumption allows motion sensors to operate efficiently and continuously without causing a significant increase in energy usage.
Watts are not deadly but it would take 12 micro-watts through the heart to kill someone.
A small shredder 100-200 watts.
"Watt" is a rate of moving energy. Anynumber of watts can heat your liters,but the less watts you use, the longer the job will take.
A 1 HP motor running at 120 volts will draw approximately 746 watts. This calculation is based on the formula: Watts = Volts x Amps.
To calculate the watts, you can use the formula Watts = Volts x Amps. If the voltage is typical at 120V for household outlets, then the trickle charger would consume around 720 watts (120V x 6A = 720W) while operating.
18650 watts
When you are placing motion sensor lights, you need to take into account the trees and bushes. Also placing them in places where they will be able to turn on if the sensor is triggered.
2050 watts
15 watts
Watts are not deadly but it would take 12 micro-watts through the heart to kill someone.
A small shredder 100-200 watts.
A horsepower is equal to 746 watts, so 10 x 746 = 7,460 watts.
Rule of thumb, 1 HP = 746 watts.
Volts don't make power. Watts do. Watts = (volts) x (amps) 1 horsepower = 746 watts
1500
Take BTUH and divide by EER. You will get watts.
It depends on the amount of amps... you have to multiply the voltage (V) with the ampere (I) to get the power (P) in watts.