A small battery AM or FM radio uses as little as 3 v at 10 mA, that is 0.03 Watts. A typical DAB radio might used 6 v at 250 mA, which is 1.5 Watts, or 40-50 times as much.
Hoovers use 1000 - 2000 watts
To determine the amperage required by a 12-volt audio radio, you would need to know the power consumption of the radio in watts. You can then use the formula: Amps = Watts / Volts to calculate the amperage.
Not very many, probably less than 20 watts.
As many as the designer likes, but the average table fan uses about 20 watts.
The Connex 3300-300 is a 10-meter radio that typically operates at around 40 watts of output power.
it has 400 watts
One million watts
I am not sure, but you can look at the back of your TV set. Most electrical equipment has its specifications there - if it doesn't state the watts, you can multiply amperes x volts.
The power required is(6) times (the amperes of current the radio draws when it operates) watts.
Hoovers use 1000 - 2000 watts
25 watts.
Abut 20 watts.
Four watts out of the box, which is the legal limit set for CB radios by the FCC.
it may use 15 to 25 watts
Usually about 1200 to 1500 watts.
they use around about 55 watts for each headlight.
To determine the amperage required by a 12-volt audio radio, you would need to know the power consumption of the radio in watts. You can then use the formula: Amps = Watts / Volts to calculate the amperage.