To convert a watt to BTUs, the factor is 1 kilowatt of power = 3412.1416 BTU/hr
3.412 BTUs equal a watt.
AnswerYour question is meaningless, as these two units measure different quantities. The watt is the SI unit of measurement of power, whereas the BtU is the Imperial unit of energy. So watts cannot be equated to BtUs.For a 1000 BTU heater, the power consumption would be approximately 293 watts. This is because 1 watt is equivalent to 3.41 BTUs.
Since 1KW-H (kilowatt-hour) = 1000 Watt-Hours =3413 BTU Then 1 watt-Hr = 3413 BTU divided by 1000 = 3.413 BTU So... bottom line is 1 watt-hour is equal to 3.413 BTU Note: For Reference: 1 BTU is the amount of energy required to raise (or lower) 1 (one) pound of water 1 (one) degree Fahrenheit.
1 kilowatts = 1,000 watts 500kw=500,000w
One million btu equals 10 therms. One hundred thousand btu equals one therm.
Having this: 400 sqf/ ton and 1 ton= 12000 BTU/h The area to be heated is 162,000 sqf so 162000/400= 405 tons 405 tonsx12000=4'860,000 btuh Converting 4'860,000 btu to watts=1424325.24 watts/hr to heat a 162,000 sf area Regards
0.29308323563892147 watts per btu there for 5200 btu = 1524.0328253223915 watts 1 watt=3.412Btu/hr 1 Btu=the amount of energy needed to heat 1 Lb of water 1 degree. A gallon of water weighs aprox. 8 Lbs.
The conversion factor of 1 BTU = 0.293 watts. So, 60,000 * 0.293 watts = 17,580 watts. 17580 watts are required to run a craftsman 60,000 btu propane forced air heater.
12,000 BTU equals 1 A/C Ton.
1kW is 3,412.13 BTU/hr
For a 1000 BTU heater, the power consumption would be approximately 293 watts. This is because 1 watt is equivalent to 3.41 BTUs.
33465 btu's = 1hp; 34.5 x 970 = 33465
12,000 BTU/hr
1 watt is equal to 3.41 btu/h. multiply 1 by 1500 and we get 1500 watts. multiply 3.41 by 1500 and we get 5115btu/h. Therefore we can come to the conclusion that 1500 watts < 45000 btu. 45000btu/h is higher than over 10 times 1500 watts.simplified answer = 45000 btu is hilariously higher than 1500 watts.-Tychusfindlay919P.S. if you meant 4500 btu/h then 1500 watts is higher
1 billion
1055 watts = 1 BTU/s, so 9000 watts x 1 BTU/s/W x 3600s/hr = 30,710BTUH, or about 2 1/2 tons.
Since 1KW-H (kilowatt-hour) = 1000 Watt-Hours =3413 BTU Then 1 watt-Hr = 3413 BTU divided by 1000 = 3.413 BTU So... bottom line is 1 watt-hour is equal to 3.413 BTU Note: For Reference: 1 BTU is the amount of energy required to raise (or lower) 1 (one) pound of water 1 (one) degree Fahrenheit.
Well, isn't that a happy little question! In the world of air conditioning, 1 BTU is equal to 0.29307107 watts. So, if you have 12,000 BTU, you can convert that to approximately 3,516.853 watts. Keep on painting with those numbers, my friend!