1 kp=746w
1.5 hp=1119w ( 746+(746/2) )
AnswerIt depends upon whether you are referring to the machine's input or output power. In North America, horsepower is still used to define a motor's output power (elsewhere in the world, the watt is used). To convert this into watts, you need to multiply by 746. However, if you want to know the input power, you must take the efficiency of the motor into account, because the input power is always higher than the output power.
It depends on the efficiency of the machine at full load. If the output is 3 horsepower, then the input will be slightly higher than that -there are 746 W in 1 hp.
One horsepower is equal to 746 watts.
50 Amps Single Phase 20 Amps Three Phase
yes but voltage will be out a little.This ok for something like a heater which wont care.But for an electric motor starting and overheating maybe a problem.In the US this would be 220v single phase and 208 volts 3 phase.
First of all, your power source must be 3-phase if you want to run the motor, then you need a step-down 3-phase transformer to give 220v 3-phase output.
The current would rise until it blows the fuse or breaker and that would produce an arc as the transformer's inductance tries to maintain the current.
There are a few reasons. In my opinion the most common is cost. In an industrial setting, three phase power is used to power motor loads. A three phase induction motor is more efficient than a single/split phase motor. They also have higher starting torque. A three phase load will also typically have a lower amp rating for the same size load as single phase. This saves money because you can use smaller wire.
motor= 2 h.p 220v=60 hz single phase single capistor 36 solat i have no formula help me how i rewind motor
Amp draw is always combined. 220V is uncertain if it is three phase or not, because there are both one phase and three phase applications of the 220V motor. In any case, the answer is always "combined".
220V single phase (domestic) 380V three phase (industrial)
5 HP is 5 x 746 watts or 3730 watts. The motor has an estimated efficiency of 90% so the total power drawn is 3730/0.9 or 4144 watts. With an estimated power factor of 0.8 the volt-amps are 4144/0.8 or 5180 VA. On a 220v system the amps would be 5180/220 or 23.5 amps.
50 Amps Single Phase 20 Amps Three Phase
Not advisable, the voltage differential is too great.
yes but voltage will be out a little.This ok for something like a heater which wont care.But for an electric motor starting and overheating maybe a problem.In the US this would be 220v single phase and 208 volts 3 phase.
5amps
First of all, your power source must be 3-phase if you want to run the motor, then you need a step-down 3-phase transformer to give 220v 3-phase output.
5 kva
That load would be 10.9 amps.
Is the 220V plug 220V only or 110/220V? (The former will have 3 prongs and the former will have 4) If your case is the latter just use the ground, neutral, and one of the hots. This will give you 120V single phase. If the case is the former you can't get 110V off that plug.