To treat 7000 gallons of water for drinking, you can use approximately 28 ounces of regular household bleach (5.25% sodium hypochlorite concentration). This amount of bleach can help disinfect the water to make it safe for consumption. Make sure to mix the bleach thoroughly and let it sit for about 30 minutes before using the water.
7000 US gallons = 26497.8825 liters
935.76389 cubic feet
7000mL equates to 1.85 US gallons.
A 1000 acre lake that is 7 feet deep (uniformly) will have 7000 acre feet of water in it. An acre foot is an acre of water one foot deep, and the unit is used to measure reservoir water capacity. The conversion factor is that one acre foot equals about 325,851.5 gallons. The lake in question is holding 7000 times 325,851.5 gallons of water.
US Gallons:26 497.88249 litres26.49788 cubic metres1 617 000 cubic inches935.76389 cubic feet5828.71929 gallons (UK)166.66667 barrels
Approximately 240 gallons, or 7000 liters per day. That is for the average adult.
In order to cover 7,000 acres 183.5-ft deep, you'll need . . .-- 0.38012 cubic mile-- 55,952,820,000 cubic feet-- 418,556,160,000 gallons-- 96,686,472,960,000 cubic inches
To find the flow rate for a 3500-gallon spa with a 30-minute turnover rate, you divide the total volume by the turnover time in hours. Since 30 minutes is 0.5 hours, the calculation is 3500 gallons ÷ 0.5 hours, which equals a flow rate of 7000 gallons per hour. This means the spa needs to circulate 7000 gallons of water every hour to achieve a complete turnover in 30 minutes.
7000 pounds with 34 gallons of gas and a 160 pound driver
1.058 U.S. gallons 4.228 U.S. quarts approximately 245 cubic inches
Roughly 7000 gallons. I am assuming when you say "middle" you are referring to the deepest part of the pool. Other assumptions include: 6ft diagonals and a 12ft shallow end length. When I say roughly its very close. The exact calculation is 6957 gallons. So, 7000 gallons should be close enough to get the chemicals right.
112000 cups 1 gallon = 16 cups 1 cup = 0.06 Gallon