That depends on the amount of coil windings, type of core, and the amount of power flowing through it. Some magnets hold as little as a few grams (For example, the home-made ones, namely a nail, some copper wire around it and a 9V battery), while some are strong enough to lift cars (Industrial magnets).
No it's pretty much the whole magnet. Hope this helps :)
An unmagnetized magnet is not a magnet. A magnet remains a magnet only as long as it remains magnetic,and ceases to be a magnet when its magnetization is lost.Be that as it may in any event, the state of magnetization of a sample of magnetic material, whether magnetizedor unmagnetized, has no bearing, neither ball nor thrust, on the weight of the magnetic material. In other words,weight is invariant under a transformation of the magnetized state.
A magnetic substance can also be made into a magnet by aligning its magnetic domains in the same direction. This alignment creates a magnetic field around the substance, allowing it to attract or repel other magnetic materials. The strength of the magnet depends on the material and the alignment of its domains.
The price of magnet balls can vary depending on the brand and quantity purchased. Generally, a set of magnet balls can range from $10 to $30. It's recommended to compare prices from different sellers to find the best deal.
Generally speaking, yes. Lower quality magnets might lose their pull, but if you don't put too much paint on it you should be fine.
This is dependent on: 1. The construction of the Magnet...materials, size, design. 2. The amount of CURRENT flowing through it.
No. A magnet only interfers with magnetic fields ... lots of old IBMs used magnetic memory cards and that's where the stories started. It might erase a floppy disk, but an electro-magnet does the job much better than a perminant magnet.
The amount of weight a magnet can hold depends on its size and strength. Generally, small magnets can hold a few ounces to a few pounds, while larger and stronger magnets can hold up to hundreds of pounds.
Cows don't have "built in magnets." Magnets are inserted down the throat of a cow as a way to prevent her from getting hardware disease from eating too much scrap metal like nails and wire. The magnet in a cow works exactly the same as any "normal" magnet does.
A Samsung Magnet cost $60.00
You would need to define 'regular magnet' to get any kind of magnet.
If a magnet is frozen too much, it can lose its magnetism temporarily. This is due to the rearrangement of molecules inside the magnet, disrupting its magnetic field. Once the magnet warms up to room temperature, its magnetism may return.
20000
A standard balloon may hold about 2 litre air at normal temperature
No it's pretty much the whole magnet. Hope this helps :)
No it's pretty much the whole magnet. Hope this helps :)
Okay, it is sort of simple. Just get a baggy, and a stick magnet. Then hold your magnet in the corner of the bag. Then, while keeping the magnet in the corner, pick up the bag and move it around the mixture of salt and sulfur. Some of the sulfur will stick to the magnet. Then, once you got as much sulfur as you could to stick to the magnet, lift up the baggy keeping the magnet in the corner of it with the sulfur sticking to it, and bring it to another clean surface. Then, lift the magnet from the corner of the baggy. The sulfur will fall right off into a little pile. Repeat these steps until there is no more sulfur sticking to magnet. Hope this helps. Tip brought to you by: www.Golfers-Planet.com Hussein moussa