For safe operation, a kerosene heater should be used in a well-ventilated area with proper airflow. It is recommended to have at least one square inch of open ventilation for every 1000 BTU of the heater's output. Additionally, ensure that there is a source of fresh air to prevent carbon monoxide buildup.
I am sure temperature plays a part bc in the winter time I spilled a little filling my kerosene heater and it took a couple hours for it to disapear. Just recently I dripped some moving the container and it only took about an hour to disapear. Also if it is outside I am sure that it will evaporate even faster. Hope this helps.
The cost to run a halogen heater depends on its wattage and the electricity rate in your area. For example, a typical halogen heater uses around 1,000 to 1,500 watts. If you run a 1,500-watt heater for 5 hours at an electricity rate of $0.13 per kilowatt-hour, it would cost approximately $0.97 per day. Always check your local electricity rates for a more accurate estimate.
To calculate the cost of running a 2 kilowatt convector heater per hour, you need to know the electricity rate charged by your utility company. Let's assume the rate is $0.12 per kilowatt-hour. In this case, running a 2 kilowatt convector heater for an hour would cost $0.24 ($0.12 x 2).
It is not recommended to add kerosene to an oil tank without consulting a professional. The amount of kerosene that can be added will depend on various factors such as the type of heating system, the current oil in the tank, and the climate. Adding kerosene incorrectly can affect the efficiency and safety of the system.
The cost to heat with a 23,000 BTU kerosene heater depends on local kerosene prices and usage duration. For example, if kerosene costs around $4 per gallon and the heater consumes approximately 0.5 gallons per hour, heating for 8 hours would cost about $16. However, actual costs can vary based on efficiency, temperature settings, and local fuel prices. Always check current kerosene rates in your area for a more accurate estimate.
Deisel would burn too dirty...sooty. kerosene is much lighter hydro carbon and burns cleaner
how much does the average gas home heater cost for a 3 bedroom single home?
$3.50-$4.00 per gallon
Today 23rd of November 2015, Kerosene costs 31720.00 pence per cubic meter.
For safe operation, a kerosene heater should be used in a well-ventilated area with proper airflow. It is recommended to have at least one square inch of open ventilation for every 1000 BTU of the heater's output. Additionally, ensure that there is a source of fresh air to prevent carbon monoxide buildup.
How much will it cost me to replace the heater core in my 1999 Mercury
It depends on what is broken on your water heater, as to how much it would cost to fix it. It might actually need to be replaced and be more cost effective to replace it.
The installation of a solar water heater will cost between $250-500.
kia sportage heater core at autozone is $ 93.99
About 27.00 for a 1988 towncar heater core at autozone.
how much is to replace heater core on 2004 mazda 6