The cost to run a Dri Buddy 1200 watt device depends on your local electricity rates. To estimate, you can calculate the cost per hour by multiplying the wattage (1200 watts) by the number of hours used, then dividing by 1000 to convert to kilowatts. For example, at a rate of $0.12 per kWh, running the device for one hour would cost approximately $0.14. Adjust the rate and usage time to find your specific costs.
The cost to use a device depends on its power consumption (wattage) and the time it is used. The 1200 watt hair dryer will cost more to use if it is used for a longer period of time compared to the 100 watt light bulb. Additionally, the cost of electricity per unit consumed (kilowatt-hour) will also affect the overall cost.
Yes, a 1200 watt amp can provide good bass for 2 Kicker CVR 12-inch subwoofers. Make sure to set the amp gain correctly, match the impedance of the subwoofers with the amp, and use a proper enclosure for optimal performance.
Yes, a 1200 watt amp can power a 300 watt box. The wattage of the amp refers to its maximum power output, so it can deliver up to 1200 watts if needed. As long as the amp is set up properly and not pushed to its maximum capacity, it can safely power a 300 watt box.
To find the amps a 1200-watt microwave uses on a 120-volt plug, you can use the formula: Amps = Watts / Volts. Therefore, 1200 watts divided by 120 volts equals 10 amps. So, a 1200-watt microwave uses approximately 10 amps when plugged into a standard 120-volt outlet.
$40.00 a year
Would be compared to 1200 watt amp
The cost to use a device depends on its power consumption (wattage) and the time it is used. The 1200 watt hair dryer will cost more to use if it is used for a longer period of time compared to the 100 watt light bulb. Additionally, the cost of electricity per unit consumed (kilowatt-hour) will also affect the overall cost.
A 1200 watt resistive load hair dryer is equivalent to 1.2 kw (kilowatts).
ahm...depends on the cost per watt charged by your local provider... how much is it?
Yes, a 1200 watt amp can provide good bass for 2 Kicker CVR 12-inch subwoofers. Make sure to set the amp gain correctly, match the impedance of the subwoofers with the amp, and use a proper enclosure for optimal performance.
Yes, a 1200 watt amp can power a 300 watt box. The wattage of the amp refers to its maximum power output, so it can deliver up to 1200 watts if needed. As long as the amp is set up properly and not pushed to its maximum capacity, it can safely power a 300 watt box.
Yes!!!!! Do not try it unless you want to get to very hurt!!!!!!!!
About 200 Dollars
800 watt should be fine
A 0 Watt bulb does not consume electric power so the cost is zero.
Almost twice as much as 100 is almost twice 60.
you just need one, a general rule of thumb is that the wattage on your amp should be double the wattegae on your sub, hence if you have a 1200 watt sub you'll need a 2400 watt amp