0
In Alabama where I live and work as an electrician for the last 31 years We typically charge by the square ft of heated space. At this writing we're charging $2.65 to $3.00 per square ft. Anything outside heated areas is extra. Example... 1000 square ft. = $2600 labor and material....excluding fixtures If you were going to do it yourself you could get by for about $1500. give or take a few bucks. <><><>
As always, if you are in doubt about what to do, the best advice anyone should give you is to call a licensed electrician to advise what work is needed.
Before you do any work yourself,
on electrical circuits, equipment or appliances,
always use a test meter to ensure the circuit is, in fact, de-energized.
IF YOU ARE NOT ALREADY SURE YOU CAN DO THIS JOB
SAFELY AND COMPETENTLY
REFER THIS WORK TO QUALIFIED PROFESSIONALS.
== ==
The cost of wiring an entire house depends on many factors:
- Number of fixtures/lights/outlets
- Size of electrical service
- Number and size of 240 devices
- Number of dedicated outlets
- Special considerations (extra long runs, high priced fixtures)
- Cost of labor in your region
You should contact a local electrician for pricing and plan to have a set of blueprints along with any special requirements.
What else can I help you with?
How much did barbed wire cost in 1800?
Barbed wire was not invented until 1874, so obtaining it in 1800 meant purchasing the raw wire, cutting it at an angle and twisting it into a form of barbed wire. The purchase price would have depended on the length and gauge of wire involved in the project.
How do you connect timer white and black house wire with red black and white wires?
House wire is "line" Black & White house goes to Black & White of Timer; the "load" (e.g. Pond Pump, etc.) is connected to the Red & White. Specifically, put all 3 whites together (nut or terminal); House (source)(line) Black to Timer Black; and "load" Black to Timer Red. The Red wire is the "Timed" (switched) hot wire.
How much does 2 awg aluminum wire cost?
The cost of 2 AWG aluminum wire can vary depending on the manufacturer, length, and location. On average, you can expect to pay between $0.50 to $2.00 per foot. It's best to check with local suppliers or retailers for the most accurate pricing.
How much does a hot wire cost?
Hotwire is an internet site not something that can he purchased physically by an individual. Hotwire helps its customers make travel plans.
What to do with the white wire in track light with black green and white wires if the house does not have a white one?
The white is neutral. The house does have a neutral wire even though it may be black. One of those black wires is the neutral and the other is the hot wire. You will have to determine which is hot and which is neutral. You can easily do this with a voltage tester. The wire that lights the tester is the hot. When you wire the light simply wire the hot to hot, and the white and green to the other wire.
How much does an Ethernet wire cost?
Harrison is awsome and is the best
What metal are your electrical cables in your house made of?
Usually the wire material is copper. On larger distribution systems, as cost saving measures, the wire material is aluminum. The triplex wire drop to your house from the utility system is always aluminum conductors.
Two metres of wire cost ninety pence how much will three metres of wire cost?
To find the cost of three meters of wire, we first need to determine the cost per meter of wire. Given that two meters of wire cost ninety pence, we can calculate the cost per meter by dividing the total cost by the number of meters: 90 pence / 2 meters = 45 pence per meter. Therefore, three meters of wire would cost 3 meters * 45 pence/meter = 135 pence.
How much does a wire cost?
About a fiver if it's a good one. It depends where u get it
How do you calculate labor cost per square foot to wire a house?
Labor cost per square foot to wire a house may vary depending on your contractors rates. They will usually have a rate per hour. You can multiple the hourly rate by the square footage needed per hour.
How much does a wire storage rack cost at Ikea?
The cost of a wire storage rack at ikea depends on the size. So it could cost about 50 dollars if you buy a small one or it could cost about 300 dollars if you buy a big one
How much does a wire whisk cost?
About a fiver if it's a good one. It depends where u get it
How much does a 1000 ft roll of quarter inch wire cost?
You will have to be much more specific to get an answer. Your description fits many items. -Wire gauge and metal at least is needed.
When was The Cost - The Wire - created?
The Cost - The Wire - was created on 2002-08-11.
Is fiber mesh concrete good for a house slab?
Fiber mesh is the best way to go in my opinion! You save the cost of wire mesh , and installtion! And works better than wire.
How much would it cost to hook up a lite switch?
75.00 depending where you run the wire from and to
How much does it cost to wire a house of 1635 sq feets?
In Ont Canada $ 12,000 plus your lighting package plus 800 for 200 amp Permits in Utility fees not in 1200/2400 = 100 amp/200amp
