0
To cool 30000 gallons of water by 5-8 degrees, you would need approximately 215-320 pounds of dry ice. Each pound of dry ice can cool about 10 gallons of water by 1 degree. So, for a 5-8 degree temperature drop in 30000 gallons of water, you would need to use 215-320 pounds of dry ice.
What else can I help you with?
How many gallons of water is 150 tons?
There are approximately 224 gallons of water in 1 ton. Therefore, 150 tons of water would be around 33,600 gallons.
What would be 230 pounds of water how many gallons?
230 pounds of water would be equal to approximately 27.6 gallons.
600 pounds of water is how many gallons?
800 pounds of water would be 95.8 US gallons.
How much does 250 gallons of water weigh in pounds?
That depends on the type material you are referring to. Also, these are two different types of measurements. Gallons is a measure of volume but the other is weight or mass. Please edit your question to include more context or details.
Convert 4ft column of water 1ft deep to gallons?
A 4-foot column of water that is 1-foot deep would contain 4 cubic feet of water. To convert this to gallons, you would multiply by 7.48 (since 1 cubic foot is approximately 7.48 gallons). Therefore, a 4-foot column of water 1-foot deep would be approximately 29.92 gallons.
How many gallons of boiling water would you have to add to a five hundred gallon tank to raise the temperature twenty degrees?
how hot is the boiling water? That makes a big difference? (is that a homework question?) I'm just trying to apply logic here, bear in mind there may be some special properties that you may have to account for like the glass/plexiglas that the water is in will have to have its temp raised also. So here goes... Raising 500 gallons of water 20 degrees would seem to require a combined value of 10,000 degrees (500 gallons times 20 degrees). So first you need to know the temperature difference between the existing water and boiling. Then devide the resulting difference into the 10,000 degrees for your simplistic answer. However, it is a bit more complicated if the tank is full at 500 gallons because you have no room to add the boiling water. That is, it would roughly take 62 gallons of boiling water to raise 500 gallons of 50 degree water to 70 degrees and the tankwouyld obviously overflow. So if it was already full you would have had to remove 62 gallons first leaving 438 gallons and consequently reducing your degree needs to 8760 degrees which means if you add the 62 gallons of boiling water you would have ended up with 72.7 degree water. So, I'd reduce the capacity to 445 gallons and add 55 gallons of boiling water and you should be pretty close.
How many gallons of 120 degree water would it take to raise 5 gallons of 65 degree water to 70 degrees?
Suppose G gallons are used. Before mixing, you have 5*65 + G*120 = 325 + 120G gallon-degrees. After mixing, you have (5+G)*70 gallon-degrees So 325 + 120G = (5+G)*70 = 350 + 70G So 50G = 25 G = 0.5 gallons.
1000 lbs steam how many gallon water?
The number of pounds in a gallon of water changes with temperature. At 100 degrees Celsius, there is about 8 lbs. per gallon of water. So with one thousand lbs. of steam, we would have around 125 gallons of water.
What is 30000 after tax?
You would have 30000 after the tax amount.
How much would 200 gallons of water weigh?
200 gallons of water would weigh approximately 1,667 pounds.
How many gallons of water is 150 tons?
There are approximately 224 gallons of water in 1 ton. Therefore, 150 tons of water would be around 33,600 gallons.
What would be 230 pounds of water how many gallons?
230 pounds of water would be equal to approximately 27.6 gallons.
600 pounds of water is how many gallons?
800 pounds of water would be 95.8 US gallons.
Does 20 pounds equal 4 gallons?
Of water no. Water would be about 32 pounds in 4 gallons.
Is 5 gallons of water heavier than 5 gallons of sand?
Five gallons of sand would actually weigh more than five gallons of water.
Does converting from Imperial Gallons at 62 degrees to US gallons at 60 degrees require a temperature adjustment before converting?
No. The difference in volume due to the temperature difference would be insignificant.
Which unit to use to measure the water in a full bathtub?
You would measure the water in a bath tub in gallons.
