depends how big the heating source is
That's going to depend on . . . -- the starting temperature of the water -- the target temperature of the water -- how fast you want it to get there -- the efficiency of the heater you use
The time it takes for 1 gallon of water to boil depends on various factors, including the heat source, altitude, and starting temperature of the water. Typically, it can take around 10-15 minutes for a gallon of water to boil on a stovetop under normal conditions.
It typically takes about 1-2 hours for a 50-gallon electric water heater to heat up from cold to the desired temperature. However, factors such as incoming water temperature, thermostat setting, and efficiency of the heater can affect the heating time.
The time it takes for 1 gallon of water to evaporate on a stove depends on various factors such as the heat setting, the size and type of pot used, and the humidity level in the air. However, under typical conditions, it can take roughly 15-30 minutes for 1 gallon of water to fully evaporate on a stove.
The time it takes to boil a 55-gallon drum of liquid depends on the heat source and the starting temperature of the liquid. It could take several hours to bring that amount of liquid to a boil using a standard heating element.
1 gallon
That's going to depend on . . . -- the starting temperature of the water -- the target temperature of the water -- how fast you want it to get there -- the efficiency of the heater you use
Around 3 hours
14 hours
Zero as you can not make a gallon of gasoline from water.
To heat 1 gallon of water by 1 degree Fahrenheit, it typically requires about 8.34 BTUs. Therefore, the time it takes for 1 BTU to heat 1 gallon of water would depend on the power of the heating source. If, for example, a heater provides 1 BTU per second, it would take approximately 8.34 seconds to raise the temperature of 1 gallon by 1 degree Fahrenheit.
about 40
You would need to remove approximately 1200 BTUs of heat to convert a gallon of water to ice. There are 8.34 lb in a gallon of water, which converting to lb-moles is 0.463. The latent heat of crystallization for water is -2583.4 BTU/lb-mole. Multiplying the two together and you get -1197 BTUs, which means you need to remove that amount of heat to convert the gallon of water to ice.
A 40-gallon gas water heater typically takes about 30 to 40 minutes to heat water from a cold start to the desired temperature. However, the exact time can vary based on factors like the initial water temperature, the heater's BTU rating, and the efficiency of the unit. Some models may heat water faster, while others may take longer.
The specific heat of water determines how much energy is needed to heat water.
8 small boxes
The time it takes for 1 gallon of water to boil depends on various factors, including the heat source, altitude, and starting temperature of the water. Typically, it can take around 10-15 minutes for a gallon of water to boil on a stovetop under normal conditions.