0
What else can I help you with?
How does 150 MPA yield compare to PSI?
150 MPa yield is equivalent to approximately 21,755 PSI. This means that a material with a yield strength of 150 MPa can withstand the same amount of stress as a material with a yield strength of 21,755 PSI before plastic deformation.
Convert psi to pa?
Multiply psi by 0.006894759086775369 to convert from psi to MPa. ex: 1000 psi = 1000 x 0.006894759086775369 = 6.89 MPa http://www.chapelsteel.com/psi-mpai.html
How much pressure is there 1 mile under the Atlantic Ocean?
The pressure 1 mile under the Atlantic Ocean is approximately 2,300 pounds per square inch (psi). This pressure increases as you descend further into the ocean due to the weight of the water above.
What is water potential measured in?
Water potential is typically measured in units of pressure, such as pascals (Pa) or bars, but can also be reported in kilopascals (kPa) or megapascals (MPa).
How do you convert rpm to psi?
You will need some other measurements to make it possible, since those are two different units of measurement. mph (or Miles Per Hour) is a measurement of speed, whereas psi (or Pounds Per square Inch) is a measurement of pressure. There is no direct conversion between them, however, if you know the volume of flow and the area it has to flow through, it should be possible to calculate. For example: A leaf blower rated at 450 cfm @ 250 mph when blowing through a 4 inch diameter pipe will produce "x" psi. So you need the flow rate and diameter to finish the conversion.
How do you convert .50mpa to psi?
To convert 0.50 MPa to psi, you can use the conversion factor: 1 MPa is approximately equal to 145.038 psi. Therefore, 0.50 MPa is approximately equal to 72.519 psi.
MPa to psi?
1 psi = 6.89476 kPa (rounded) 1 kPa = 0.14504 psi (rounded) 1 mPa = 1,000 kPa
How does MPa relate to PSI regarding compressive strength?
1 MPa = 145.038 PSI.
How do you convert MPa units to pounds per square inch units?
To convert MPa units to psi units, you can use the conversion factor: 1 MPa = 145.038 psi. Simply multiply the pressure in MPa by 145.038 to obtain the pressure in psi.
How does 150 MPA yield compare to PSI?
150 MPa yield is equivalent to approximately 21,755 PSI. This means that a material with a yield strength of 150 MPa can withstand the same amount of stress as a material with a yield strength of 21,755 PSI before plastic deformation.
What is 2.95mpa to psi?
2.95 megapascal = 428 psi
What is 0.6 MPA in PSI?
It is 217.556607 pounds per square inch.
What does MPa stand for in plumbing?
MPa stands for Megapascal, a unit of pressure. 1 Mpa is equal to 145.0377 psi
Brinell hardness of 300HB in psi and Mpa?
To convert Brinell hardness of 300 HB to psi, use the formula: Brinell Hardness (HB) = (12.9 * N) / (D^2), where N is the applied force in kg and D is the diameter of the indention in mm. Given 300 HB, N/A = 1250 and D = 10 for a steel ball. Converting 300 HB to psi: (12.9 * 1250) / (10^2) = 16112.5 psi. To convert 300 HB to MPa: 16112.5 psi * 0.00689476 = 111.1 MPa.
Given Concrete cylinders were tested in a compression machine with the following strength results 4620 4580 4400 4460 and 4200 all in psi. Required Find the average strength in MPa?
1 psi = 0.00689475728 MPaAs such the average strength in PSI = (4620 + 4580 + 4400 + 4460 + 4200) / 5= 4452 psiAverage strength in MPa = 4452 x 0.00689475728= 30.69545941056 MPa= 30.7 MPa
How does 500 MPA yield compare to PSI?
Divide by 6.895 and multiply by 1000 to get psi (500/6.895) x 1000 = 72,516 psi
Convert psi to pa?
Multiply psi by 0.006894759086775369 to convert from psi to MPa. ex: 1000 psi = 1000 x 0.006894759086775369 = 6.89 MPa http://www.chapelsteel.com/psi-mpai.html
