60 degrees is equivalent to 1,852,000 nanometers (nm), since 1 degree is approximately equal to 30,866,666.7 nm.
60 degrees Fahrenheit = 15.5555556 degrees Celsius
26 degrees Celsius is cooler than 60 degrees Fahrenheit. This is because 26 degrees Celsius is equivalent to about 79 degrees Fahrenheit.
Sixty degrees north is 60 degrees away from the Equator.
The latitude of 60 degrees north is 60 degrees north of the equator. It is considered the Arctic Circle, a line of latitude at approximately 66.5 degrees north that marks the southernmost point where the sun does not set on the summer solstice.
"Cooler" is a subjective term, but traditionally speaking, 60 degrees Fahrenheit would be considered cooler than 104 degrees Fahrenheit.
torque settings are: 4JG2 cylinder head, 49 Nm + 60 degrees + 60 degrees.
stage 1 40 nm stage 2 60 nm stage 3 90 degrees Stage 4 90 degrees
60 degrees Celsius is equal to 140 degrees Fahrenheit.
An angle of 60 degrees is an acute angle because it is greater than 0 but less than 90 degrees.
Total, the triangle has 180 degrees, and each angle has 60 degrees.
60 degrees Fahrenheit is equal to approximately 15.6 degrees Celsius.
60 degrees Celsius is warmer than 60 degrees Fahrenheit. 60 degrees Celsius is equivalent to 140 degrees Fahrenheit.
Head Bolt:100 nm Loosen all bolts. 50 nm Plus 90 Degrees Plus 90 DegreesConrod Bolt:50 nm Plus 45 Degrees Plus 45 DegreesMain Bolt:20 nm Plus 90 Degrees Plus 90 Degrees
The last angle would have to be 60 degrees as well. Since there are 180 degrees in a triangle, 60+60=120 and 180-120=60, it has to be 60 degrees.
Use new bolts ! (each step involves tightening all bolts in the right sequence) Step 1 25 Nm Step 2 Angle turn 60 degrees Step 3 Angle turn 60 degrees Step 4 Angle turn 30 degrees Step 5 Warm up engine Step 6 Angle turn 30 - 50 degrees Tightening sequence cilinderhead bolts: 8 4 1 5 9 flywheelside 7 3 2 6 10 exhaust manifold: 25 Nm Inlet manifold: 22 Nm Valve-cover: 8 Nm
Cylinder head bolts Torgue wrench settings: Stage 1 ................ 25 Nm (18 lbf ft) Stage 2................. Angle-tighten a further 60 degrees Stage 3................. Angle-tighten a further 60 degrees Stage 4................. Angle-tighten a further 60 degrees USE NEW BOLTS
180 degrees. An equilateral triangle measures 60 degrees at every angle.