depends upon the diameter and length of the straw
Yes, but it would have to be tilted, almost flat. You can only drink through it if your mouth is not more than 33 feet higher than the surface of the liquid that you're drinking through the straw.
If a straw is immersed in a liquid with a density less than that of water, the liquid will not be able to support the weight of the straw, and the straw will float. The liquid's lower density means it exerts less buoyant force on the straw compared to water. As a result, the straw may remain partially submerged or float on the surface, depending on its material and design.
When you place a straw through a liquid, adhesion causes the liquid molecules to cling to the sides of the straw. This interaction creates a meniscus, allowing the liquid to rise slightly within the straw due to capillary action. This phenomenon occurs because the adhesive forces between the liquid molecules and the straw material are stronger than the cohesive forces between the liquid molecules themselves.
Adhesion causes the liquid to rise slightly in the straw, creating a meniscus. This phenomenon occurs due to the attractive forces between the liquid molecules and the straw surface, which causes the liquid to climb up the straw slightly before reaching equilibrium.
Air pressure pushes down on the liquid inside the helio straw, causing it to rise when the pressure is reduced by sucking on the straw. This creates a vacuum effect, allowing the liquid to flow up the straw and into your mouth.
A McDonald's straw holds about 12528.1mm cubed liquid. I calculated the density and volume and came up with 12,528.1 milimeter cubed of liquid.
It depends on the diameter of the straw, which varies. Multiply the diameter by 3.14 and the result by the length of the straw.
pretty sure it's capillary action
A standard plastic straw can hold approximately 0.5 to 1 milliliter of water at one time. It can vary depending on the size and material of the straw.
When you suck on a straw, you decrease the air pressure inside the straw, creating a partial vacuum. The higher air pressure on the surface of the liquid outside the straw then pushes the liquid up the straw and into your mouth.
Sucking on a straw creates a lower air pressure inside the straw compared to the pressure of the liquid outside. This pressure difference causes the liquid to be pushed up the straw and into your mouth.
Liquid is held in a straw by a combination of cohesion, adhesion, and atmospheric pressure. Cohesion is the attraction between molecules of the liquid itself, while adhesion is the attraction between the liquid and the inner surface of the straw. The atmospheric pressure pushing down on the liquid also helps to keep it in the straw.
When you suck on a straw, you create a partial vacuum in your mouth. This decrease in air pressure above the liquid in the straw allows atmospheric pressure to push the liquid up the straw and into your mouth.
The liquid moves up the straw due to air pressure. When you suck on the straw, you create low pressure inside the straw. The higher air pressure outside the straw then pushes the liquid up to balance the pressure difference.
The speed at which liquid travels up a straw depends on factors such as the diameter of the straw, the viscosity of the liquid, and the force applied to push the liquid up. In general, liquids can travel up a straw at a rate of about 1-2 meters per second.
Yes, but it would have to be tilted, almost flat. You can only drink through it if your mouth is not more than 33 feet higher than the surface of the liquid that you're drinking through the straw.
when you drink through a straw you remove some of the air in the straw. because there is less air the pressure of the straw is reduced. but the atmospheric pressure on the surface of the liquid remains the same. henceforth how it helps you drink