Spark Plug NGK BR8E1X -Gap 0.7-0.8 mm Ignition Timing 14° at 7,740 rpm Transmission Oil SE Class SAE 10W30 or 10W40 -Capacity 0.85 liter -Level M/C vertical, wait 5 min., between lines in window Compression 171 psi Chassis Fork Oil Kayaba 01 SAE 5W -Capacity 660-668 cc
8
The oil-to-gas mixture for a Suzuki RM80 should be at a ratio of 32:1, which means 4 ounces of two-stroke engine oil should be mixed with 1 gallon of gasoline. Make sure to use a high-quality oil designed for two-stroke engines to ensure proper lubrication and performance.
In electrical systems, "RM" typically refers to a "relay module." A relay module is an electrical device used to control a circuit by interfacing input signals with high-power output components. It helps in automation and protection of electrical systems by allowing them to be controlled remotely or automatically.
In the atmosphere
The rm value (also known as retention factor) in chromatography is a measure of how strongly a compound is retained by the stationary phase relative to the mobile phase. It is calculated as the distance traveled by the compound divided by the distance traveled by the solvent front. The rm value helps in characterizing and identifying compounds based on their behavior in the chromatographic system.
45
750ml
650 M OF OIL
135ml to 5 litres of petrol.
buy a manual
Its stamped on the Crankcase and its 850ML.
10.1 ounces per tube
2003
On the crankcase there should be a reading right by the oil plug that has the reading for the proper amount of oil.
Yes, oil should be put in the crankcase on a 1989 Suzuki RM 250. The proper oil to use for this is a product made by Standard Oil called 80-90W Gear Oil.
650 ml oil is transmmission capacity
David Henry, is that you?!! Geez, buy a manual fer gosh sakes.