answersLogoWhite

0

A 30 amp fuse wire typically has a diameter of around 0.08 inches (2 millimeters).

User Avatar

AnswerBot

1y ago

What else can I help you with?

Continue Learning about Natural Sciences

What colour goes to fuse in American wire?

The standard color coding for fuses in American wire is as follows: 15-amp fuse: blue 20-amp fuse: yellow 30-amp fuse: green


Can you use 10 gauge wire to connect a 2 15 amp outlets to a 30 amp breaker?

No, it is not safe to use 10 gauge wire with a 30 amp breaker as the wire is not rated for that high of a current. It is important to use the correct wire gauge that matches the breaker amperage to prevent overheating and potential fire hazards. For a 30 amp breaker, you should use at least 10 gauge wire.


Can a 25 amp fuse replace a 30 amp fuse in a central ac unit?

It is not recommended to replace a 30 amp fuse with a 25 amp fuse in a central AC unit. The fuse should match the specified amperage requirements to prevent damage or overheating of the unit. Using a lower amp fuse could potentially lead to electrical issues or failure of the AC unit.


Can I use 10 gauge wire with a 30 amp dryer?

No, you should not use 10 gauge wire with a 30 amp dryer. A 30 amp dryer requires a minimum of 10 gauge wire, but it is recommended to use 8 gauge wire to ensure safety and to meet electrical code requirements. Using 10 gauge wire may cause overheating and pose a fire hazard.


Can you use a 20 amp circuit breaker for an electric dryer?

If you are referring to a cloths dryer, the answer depends on the requirements of the dryer. Most dryers require AWG#10 wire with a 30 amp fuse. If the wiring is AWG#12 then use a 20 amp breaker but never use it on AWG#10 which requires a 30 amp breaker. If you are referring to a hair dryer then yes a 20 amp breaker is fine.

Related Questions

What colour goes to fuse in American wire?

The standard color coding for fuses in American wire is as follows: 15-amp fuse: blue 20-amp fuse: yellow 30-amp fuse: green


Can you replace a 30 amp fuse with a 15 amp fuse?

Not a good idea. The 15 amp fuse will be protection a #14 wire which is rated for 15 amps maximum capacity. By changing the 15 amp fuse to a 30 amp fuse you would then be allowing 30 amps maximum capacity on a #14 wire. By doubling the load the extra heat generated on the smaller wire could be enough to melt the insulation from the wire and that could cause the wire to short out. If the wire shorts out inside the wall it means the removal of the wall board to replace the wire to restore the circuit to an operational condition. The proper wire sizing for a 30 amp fuse is, #10 copper wire with an insulation rating of 90 degrees C.


How do you choose the right fuse for the job?

The correct size fuse needed is based on the size wire used in the circuit. The size wire needed is based on the load that will be applied to the circuit. 1. AWG 14/2 wire = 15 amp fuse 2. AWG 12/2 wire = 20 amp fuse 3. AWG 10/2 wire = 30 amp fuse 4. AWG 8/2 wire = 40 amp fuse


Can you replace fuse 13 a 20 amp fuse with a 30 amp fuse in a 1997 Chevy silverado?

Sure.If you want a fire, that is!AnswerNo. A 30A will cook the wire before it pops.


Can 600v wire works 30 amp fuse?

What size is the wire? AWG 10, 600V is rated for 30 amps. Any AWG less than 6 would also be ok for a 30 amp circuit....


Can a 30 amp fuse replace a 20 amp fuse?

NO!!!! The fuse is your safety device. Never replace a smaller fuse with a larger fuse.Another answerPeople who have done that in the past have burned down their homes. Changing from a 20 amp to 30 amp fuse puts 50% more current through the wire, overheats the wire and can result in fire. Don't do it. As the above post explains, the fuse is your safety device.To Ad:The above answers are dead on. Remember the fuse protects the wiring from overheating and catching on fire. A 20 amp fuse is used on 12 gage wire and a 30 amp fuse is used on 10 gage wire which is must larger. Never mix them up.To Ad: actually if you people wouldve took some kind of electical class its better to put a bigger fuse.. you just do not need to double the size.. if you got a 20 put a 30 in it it want blow.. if you put a 40 then you will have problems...


Can you replace a 15 amp fuse with a 30 amp fuse?

Sure, you can replace a 15 amp fuse with a 30 amp fuse, but it's not recommended. The 30 amp fuse has a higher current rating, which means it can allow more current to flow through the circuit than what it was designed for. This can pose a fire hazard and damage your electrical equipment. So, technically you can do it, but it's like putting a square peg in a round hole - it might fit, but it's not a good idea.


What is the appropriate wire size for a 30 amp breaker?

The appropriate wire size for a 30 amp breaker is typically 10 gauge wire.


What is the appropriate wire size for a 30 amp circuit?

The appropriate wire size for a 30 amp circuit is typically 10 gauge wire.


What is the recommended wire size for a 30 amp circuit?

The recommended wire size for a 30 amp circuit is typically 10 gauge wire.


What is the recommended wire size for a 30 amp breaker?

The recommended wire size for a 30 amp breaker is typically 10 gauge wire.


What is the maximum amperage capacity of a 30 amp fuse box?

The maximum amperage capacity of a 30 amp fuse box is 30 amps.