By bringing the paper clip close to the magnet, the magnetic field of the magnet will align the magnetic domains within the paper clip, causing it to become temporarily magnetized. When the paper clip is removed from the magnet, it will lose its magnetism once the magnetic field is no longer present.
I would go with centemeter to the nearest tenth (milieter).
Depends on the size of the paper clip. Paper clips come in a range of sizes. Agreed. Also: The weight of one standard paper clip = 0.00043kg x 9.8m/s2 = 0.004214 N, or 0.000947345 lbf. So if you divide 1 lbf by the weight of a standard paper clip given then with that size of paper clip it would take about 1,056 to make a pound.
You would typically use grams (g) or milligrams (mg) to measure the mass of a paper clip.
Magnetic filed of the bar magnet will penetrate a paper. Hence the clip will be attracted and stick to the magnet pressing the paper too to the magnet.
aluminum pot
Paper clip APEX
it is to clip paper so that the paper would not be flying around everywhere
A paper clip is denser than water, so it would sink if placed in water.
If it is made of metal, it is a conductor.
put the paper clip at the front f the paper airplane.it helps the airplane to fly!
You would use the SI unit of length, which is the meter (m), to measure a paper clip.
A small metallic paper clip has a mass of a little over one gram.
Most paper clips are made from steel. You could make a paper clip out of copper, but the cost would be higher for something that would do the same job.
you would weigh it by using grams
Yes.
The paper clip was not discovered. It was invented.
The paper clip clings to the the magnet