The reading on the 3-ph meter would equal the sum of the three separate readings on the single-phase meters.
The neutral sides of the single phase meters do not need to be connected to the neutral wire as long as they are connected together.
There is no time limit. The meter operates on the sensing of amperage on the circuit. On the older types of meters mechanical connections moved the dials to total the amount of wattage used. These meters are all calibrated for accuracy by weights and measures before that are installed into service
Nope. 350 meters is less than 1,214 feet. (350 meters = 1,148.29 feet).
The effective range of the M9 service pistol is about 50 meters, but it can potentially hit targets at distances up to 1800 meters. However, its accuracy and lethality greatly diminish beyond the effective range.
To determine the square meters in 750 lineal meters, we need the width of the area. If you provide the width in meters, we can calculate the square meters by multiplying the width by the length (750 meters).
1 kilometer is 10 hectometers. There are 100 meters to every hectometer, and 100 cm in every meter. Each centimeter is 10 mm.
There is no time limit. The meter operates on the sensing of amperage on the circuit. On the older types of meters mechanical connections moved the dials to total the amount of wattage used. These meters are all calibrated for accuracy by weights and measures before that are installed into service
If you are referring to using a volt meter then you will just get a negative reading on most modern digital meters. If you are using an old analogue meter you may get no reading.
You cannot compare linear meters with square meters. Rephrase and resubmit.
When connected in series, multiple amp meters in the same circuit should read the same.
there is no answer to this. meters is length, square meters is area, not the same thing so you cannot compare.
power factor meters are connected across the supply
not possible to compare length (meters) by area (acres)
use water
Automatic meter reading technology allows utility companies the prospect of reading meters off site as the technology can read meters remotely. This allows the company to cut labour costs.
1ft is roughly 30cm or 0.3m
tonnes are units of masscubic meters are units of volumeyou cannot compare the two.
3 kilometers is 3000 meters, 100 times larger than 30 meters.