To calculate the amount of fertilizer to add for a 500 to 1 ratio, take the number of ounces of water (128 per gal X 3 = 384) and divide that amount by 500. The answer comes out to approximately three quarters of an ounce, or .768 ounces for three gallons of water.
which two things can happen when heat is added to a liquid?
When changing the liquid refrigerant in a system, it should be added to the high-pressure side of the compressor. This is typically done through the service port on the liquid line, which is connected to the high-pressure side. Adding refrigerant on this side ensures that it enters the system in a liquid state, allowing for proper operation and efficient cooling. Always follow manufacturer guidelines and safety protocols when handling refrigerants.
When thermal energy is added to a liquid, the average kinetic energy of the liquid molecules increases, causing them to move faster and further apart. This results in an increase in the liquid's temperature, leading to its phase transition into a gas if the added energy is sufficient to overcome the intermolecular forces holding the liquid together.
stones :)
The process is called evaporation. Heat is added to a liquid, causing the molecules to gain energy and transition into a gaseous state. Evaporation occurs at the surface of the liquid.
Fertilizer should be added twice a month with a low nitrogen fertilizer.
millions of gallons
Liquid
This depends on the type of fertilizer; phosphates for ex. can react.
That is 18 pints
Liquid
Plants can be grown by a system called hydroponics, where they are grown in a nutrient rich liquid (ie water with fertilizer added); instead of soil.
A gallon of liquid fertilizer with a 15-0-0-20 formulation would weigh approximately 10.4 pounds. This weight can vary slightly depending on the specific density of the fertilizer and any added chemicals.
For optimal plant growth, it is recommended to add 1-2 tablespoons of fish fertilizer per gallon of water.
As much as possible - if he has enough cornmeal.
You need 17 gallons for a 15% volume/volume mixture.
I take it that there should be percentage signs in this question. How many gallons of pure water must be added to 10 gallons of 30% saltwater to make a solution that is 25% saltwater?" If 30% of the 10 gallons is saltwater that means that 3 gallons are saltwater. As only pure water will be added, we need to find out how many gallons = 100% if 3 gallons = 25%. The relationship of 100 to 25 is 4 : 1, so there will need to be a total of (3 x 4) gallons at the end of the operation. As 3 x 4 = 12, and as we started with 10 gallons, that means that we need to add 2 gallons of pure water.