answersLogoWhite

0

The charge of a "hole" is positive (+ive), it is the lack of an electron (negative/-ive) to make the atom "neutral".

User Avatar

Wiki User

13y ago

What else can I help you with?

Continue Learning about Natural Sciences

How do you replace a photocell on your outdoor light post?

# Turn off the power to the lamppost circuit at the breaker box. # Unscrew the mounting screws holding the lamp in place, and pull the lamp fixture from the post. Remove the wire nuts, and use the circuit tester to be sure the power is off. # Disconnect the wires to the fixture and the photocell. # Disconnect the locking nuts that hold the existing photocell on the post, and remove the photocell. If your lamp doesn't have a photocell, you'll need to drill an access hole in the post to install one. # Install the adhesive foam ring (provided with the photocell) around the mounting hole. # Run a bead of silicone sealant around the photocell where it will press against the interior of the lamppost. # Push the sensor through the mounting hole, and secure it with a locking nut. # Add silicone sealant inside the lamp fixture at any point where moisture might leak through to the photocell. # Connect the white wires from the power supply, lamp, and photocell together. Secure the connection with a wire nut. Connect the black photocell wire to the black power supply wire in the same manner. Connect the black lamp fixture wire to the red photocell wire and secure the connection with a wire nut. # Reainstall the fixture on the lamppost.


Does a black hole have positive or negative charge?

A black hole can have either positive, negative, or neutral charge. The charge of a black hole can be acquired through the consumption of charged particles, but the overall effect of the charge on the black hole's properties is not significant compared to its mass.


How does a photocell work in a kerosene heater?

A photocell in a kerosene heater works by using light to generate an electrical current. The photocell detects the flame produced by the heater and triggers the fuel pump to continue supplying kerosene. If the flame goes out, the photocell senses the absence of light and shuts off the fuel supply to prevent dangerous fuel leaks or build-up.


Why is air removed from the photocell?

Air is removed from the photocell to prevent the formation of bubbles, which can interfere with the optical measurements by scattering light and affecting the accuracy of the readings. Additionally, eliminating air helps minimize contamination and oxidation, ensuring stable performance and prolonging the lifespan of the photocell. This process also enhances the sensitivity and reliability of the detection system.


Can you wire a photocell to work at night instead of during the day?

Photocells are designed to work at night when it gets dark and turn off in the morning when it gets lighter. If the photocell is on during the day then it is not working the way it was designed to. Time to get a new one.

Related Questions

How does a photocell convert light into electrical energy?

A photocell contains semiconductor materials that generate charge carriers when exposed to light. The photons in the light provide energy to these charge carriers, creating an electrical current as they flow through the semiconductor material. This current can then be used as electrical energy.


How do you replace a photocell on your outdoor light post?

# Turn off the power to the lamppost circuit at the breaker box. # Unscrew the mounting screws holding the lamp in place, and pull the lamp fixture from the post. Remove the wire nuts, and use the circuit tester to be sure the power is off. # Disconnect the wires to the fixture and the photocell. # Disconnect the locking nuts that hold the existing photocell on the post, and remove the photocell. If your lamp doesn't have a photocell, you'll need to drill an access hole in the post to install one. # Install the adhesive foam ring (provided with the photocell) around the mounting hole. # Run a bead of silicone sealant around the photocell where it will press against the interior of the lamppost. # Push the sensor through the mounting hole, and secure it with a locking nut. # Add silicone sealant inside the lamp fixture at any point where moisture might leak through to the photocell. # Connect the white wires from the power supply, lamp, and photocell together. Secure the connection with a wire nut. Connect the black photocell wire to the black power supply wire in the same manner. Connect the black lamp fixture wire to the red photocell wire and secure the connection with a wire nut. # Reainstall the fixture on the lamppost.


Does a black hole have positive or negative charge?

A black hole can have either positive, negative, or neutral charge. The charge of a black hole can be acquired through the consumption of charged particles, but the overall effect of the charge on the black hole's properties is not significant compared to its mass.


Why hole has positive charge?

A hole in a semiconductor has a net positive charge because it represents the absence of an electron, which has a negative charge. When an electron moves from its position to fill the hole, it leaves behind a positively charged location or "hole." This movement of electrons creates a current flow in the material.


Where do you buy a 6 volt replacement photocell?

You can buy 6v photocell dusk to dawn switches from Acetek photocells


How does a roof affect the position of a photocell?

the roof is slanted so you will need to put your photocell on the side of the roof where the sun is shining


How do you reset photocell?

To reset a photocell, first, turn off the power supply to the device for about 10-15 seconds. Then, restore the power, allowing the photocell to recalibrate itself. If it has a reset button, press it according to the manufacturer's instructions. Finally, ensure that the photocell is clear of any obstructions or dirt that might affect its operation.


What happens if gamma rays falls on a photocell?

Gamma rays typically have enough energy to ionize atoms in the photocell material, releasing electrons. This can result in a current being generated in the photocell, which can be used to detect the presence of gamma rays.


When light strikes a photocell does the resistance increase or decrease?

When light strikes a photocell, the resistance decreases, allowing current to flow more freely.


In a photocell light energy is converted into?

In a photocell, light energy is converted into electrical energy. When light strikes the photocell surface, photons of light are absorbed, releasing electrons that create an electric current.


How does a photocell work in a kerosene heater?

A photocell in a kerosene heater works by using light to generate an electrical current. The photocell detects the flame produced by the heater and triggers the fuel pump to continue supplying kerosene. If the flame goes out, the photocell senses the absence of light and shuts off the fuel supply to prevent dangerous fuel leaks or build-up.


What is the purpose of a breaching charge?

Literally, to make a hole. A breaching charge would be shaped and designed to push on a concrete or masonry wall, breaking a hole through the wall.