No, a 700 amp fuse would not be suitable for a 500 amp circuit. The fuse amperage rating should be equal to or slightly higher than the circuit's maximum amperage to provide proper protection. In this case, a 500 amp fuse or slightly higher would be the appropriate choice.
Yes, the adaptor allows load currents of 1200 amps or less, and 500 amps is included in that. The voltage of a supply stays constant, the current that flows is determined by what power the appliance needs to run.
700 grams is heaver. A kg (kilogram) is 1000 grams so one-half KG is 500 grams, less than 700 g.
The Alpine V12 MRV-T501 amp has a maximum power output of 500 watts.
1 amp = 1000 milliamps so 1700 milliamps = 1.7 amps.
To bridge a 4-channel Sony Xplod 500 watt amp, first ensure the amp is powered off. Connect the positive speaker wire from the left channel (positive) to the positive terminal of the subwoofer, and the negative speaker wire from the right channel (negative) to the negative terminal of the subwoofer. Set the amp's switch to 'bridged' mode, if available, and adjust the gain accordingly for optimal performance. Always consult the amp's manual for specific instructions and wiring diagrams.
200 + 500 = 700
1.4
-700 is smaller than -500. Integers*
percentage = 71.43%% rate:= 500/700 * 100%= 0.7143 * 100%= 71.43%
500+200=700
700
700 watt is 0.93871 horespower
700
140% of 500 = 140% * 500 = 1.4 * 500 = 700
700 x 500 = 350000 square feet.
0.7143
7/5 of 500 is 700.