Voltage causes current to flow in an electric circuit.
The third part of an electric circuit is the power source, which provides the electrical energy needed to drive the current through the circuit and power the load. This can be a battery, generator, or power supply depending on the application.
A cell basically works as a producer of a potential difference in the circuit which is necessary for the electrons to travel in a region. Therefore using this principle we can understand that almost anything that can produce a PD can be used in an electric circuit. The best example would be of emf through EM induction of the Faraday's experiment
Ultimately this is a special case of the Second Law of Thermodynamics.In the case of an electric circuit, consider Ohm's Law. Without a voltage, you will have no current. Also, if a current flows, keeping up the voltage requires power.
Electric cells have two terminals, a positive (+) and a negative (-), to facilitate the flow of electrons in a circuit. Electrons are released at the negative terminal and flow through the circuit to the positive terminal, creating an electric current. Having two terminals allows for the creation of a potential difference, which is essential for generating electricity.
Too vague of a question. As long as it is a closed circuit it will flow.
it is 5mm
Fuse is a device that acts as a traffic controller in the electric circuit, it means it breaks the circuit when the power of current is more than what it it needed and prevents the possible damages ...
Globe Switch Wires(to connect) power Pack
The potential energy of an electric fan is typically in the form of electrical potential energy. This energy is stored in the fan's electric circuit when it is connected to a power source.
The source of voltage in an electrical circuit is typically a power source, such as a battery or a generator, that provides the energy needed to push electric charges through the circuit.
I guess Electric Circuit....
battery, generator, alternator, etc.
Voltage causes current to flow in an electric circuit.
The term is "circuit" (from the same root as circle) An electric circuit must be uninterrupted for the current to flow. (This is why circuit-breakers are also called circuit-interruptors.)
the history of the electric circuit is that the person who made it his name is jack kilby but the history is that the electric circuit was one of the easiest way was to make the electric circuit when the electricity went out. THE END
Resistors dissipate energy in the form of heat.