0
What else can I help you with?
Is changing the size and shapes of piece of wood would be a chemical change?
No, changing the size and shape of a piece of wood is not a chemical change; it is a physical change. In a physical change, the material's appearance or form is altered, but its chemical composition remains the same. For instance, cutting or sanding wood changes its dimensions but does not alter its chemical structure.
What is a flat piece of wood called?
A flat piece of wood is called a board.
How physical property such as mass or texture change without causing a change in substance?
Lets say you had wood. You can grind around the surface of the wood to make its texture softer or use a saw to cut the wood so each separate piece has a smaller mass. However, after these changes, you still have the same substance as before (in this case, wood) ^_^
What type of wood cannot be penetrated by a bullet?
All wood can be penetrated to an extent. It depends on the thickness and mass of a given piece of wood that decides how far the bullet will penetrate or if it will exit out the other side
What is a thick piece of wood called?
A thick piece of wood is called a plank. It is a long, flat piece of wood that is often used in construction or woodworking projects.
Is sanding a piece of wood physical changes?
Yes, it is a physical change.
Is sanding a piece of wood physical changes or chemical change?
physical
What is a sanding block used for?
A sanding block is basically just a small piece of wood or other material covered with a sanding belt or sand paper.
What is a rough draft check list?
it is if you are sanding down a piece of wood or metal and you need to check that you have everything you need.
Why is it important to sand down wood before a finish is applied?
Sanding wood is removes scratches from your piece of timber. Start with a rough piece of sand paper (120) and work up to finer grains (160, 240, 320, and finally 400). Sanding down our wood will give your timber a smooth feel and will the the grain easier to see. Sanding is especially important if you are using a figured piece of timber as it makes the beauty of the timber more prominent. Always sand to ensure that your produce the highest quality product
What is the mass of a cm piece of pine density is cm?
The mass of a 1 cm piece of pine wood depends on the density of the pine wood. To calculate the mass, you would multiply the density of the pine wood by the volume of the 1 cm piece (which is 1 cm^3 for a cube). So, mass = density x volume.
What protective gear do you wear when sanding and cutting wood?
you can wear safety glasses when sanding and cutting wood.
How much does a standard wood staircase weigh per sf?
Floor Sanding - London based floor sanding company Sanding Wood Floors! is a complete service for floor sanding London and all types of floor sanding services, flooring in London. http://www.sanding-wood-floors.co.uk/
How will you determine the density of a solidlike a piece of wood?
To determine the density of a solid like a piece of wood, you can measure its mass using a scale and then measure its volume by displacement or geometric measurement. Divide the mass by the volume to calculate the density of the wood.
Why does same sized piece of wood is lighter than iron piece?
The wood is "lighter" (weighs less; has less mass) than the iron because of it's density. Iron has a greater density than wood, and density is defined as mass/volume, so having the same volume (size), the iron will have a greater mass.
Why would a piece of wood loss mass when burn?
It would loose mass as it is being consumed by burning.
What are the best techniques for sanding and smoothing wood rough after applying polyurethane?
After applying polyurethane to wood, the best techniques for sanding and smoothing the rough surface include using fine-grit sandpaper in a circular motion, sanding with the grain of the wood, and finishing with a final light sanding to achieve a smooth finish. Additionally, using a sanding block or sanding sponge can help to evenly distribute pressure and avoid over-sanding in one spot.
