No it is not. It must be operated by human hand.
go to the Help option in Matlab. It will not help at all.
To have each switch operate a single light, a 3-way switch must be installed for each light. Each switch needs to be wired to its respective light, with one wire running between the switch and light fixture. This way, each switch will control the light it's connected to independently of the others.
It depend on where the switch is located in the circuit.
A switch in the master bedroom.
A refrigerator light typically uses a door switch, which is a type of momentary switch. This switch is activated when the refrigerator door is opened, completing the circuit and turning on the light. When the door is closed, the switch is disengaged, turning off the light. These switches can be mechanical or electronic, depending on the refrigerator model.
A robot shuts off by a dead man's switch. Wikipedia says it's called the enabling or live man's switch.
My suggestion is with a hickory switch.
he's a robot and his funny switch was flicked off
where is brake light switch
It is the brakes light switch
To control a light with a switch, the switch has to be connected in series with the light fixture.
To use the power to switch on the light, locate the light switch and flip it to the "on" position.
To switch on the light in the room, locate the light switch on the wall and flip it upwards. This will turn on the light and illuminate the room.
Light switch was created in 1884.
i think that the light switch is shorting out are the auto light switch shorting for the thumb switch
turn head light switch till it clicks and theses your dome light switch...
I can not understand your question.