It burns quite well. Acetylene (IUPAC: ethyne) is used in welding torches. It will burn at 514 degrees Fahrenheit (ChaCha Answers).
It is not recommended to mix helium and acetylene as they have different physical and chemical properties. Helium is an inert gas while acetylene is a flammable gas. Mixing them could create a hazardous situation due to the risk of combustion or explosion.
Acetylene
Acetone is used in acetylene tanks to absorb and stabilize acetylene gas. It acts as a solvent that helps dissolve acetylene, allowing for safer storage at higher pressures. By absorbing acetylene, acetone prevents the gas from becoming too concentrated, which could lead to instability or detonation. This combination helps ensure the safe handling and transport of acetylene.
Carbon monoxide is not an inert gas.
Acetylene cylinders contain acetone to stabilize the acetylene gas and prevent it from exploding. Acetylene is highly volatile and can decompose explosively under pressure; by dissolving it in acetone, the gas can be safely stored at higher pressures. The acetone acts as a solvent, allowing a larger volume of acetylene to be contained within the cylinder. This ensures safe handling and transportation while maintaining the effectiveness of the gas for various applications.
It is not recommended to mix helium and acetylene as they have different physical and chemical properties. Helium is an inert gas while acetylene is a flammable gas. Mixing them could create a hazardous situation due to the risk of combustion or explosion.
The gas is going to depend on what style of welding you are doing. For TIG (tungsten inert gas) it is 100% argon. For heliarc, which is a form of TIG, it is 100% helium. For MIG (metal inert gas) it is 75% argon/ 25% carbon dioxide. Finally, for gas welding, it acetylene and oxygen--separate tanks. (my son helped on this one)
Argon is generally not used for welding on its own because it is an inert gas and does not support combustion like acetylene. However, argon is commonly used as a shielding gas in processes like TIG and MIG welding to protect the weld pool from atmospheric contamination.
Argon is an inert gas- it does not react with any other gasses. While fuel gasses (acetylene) and oxygen must be separated during storage due to the fire hazard, there IS no fire hazard from an inert gas. It may be stored with fuel gasses or with oxygen.
Acetylene is a gas at standard temperature and pressure.
Acetylene
Acetylene is a gas. It starts with the letter a.
The expansion ratio of acetylene is approximately 1:668 when it is converted from liquid to gas. This means that one volume of liquid acetylene will expand to form 668 volumes of acetylene gas at room temperature and pressure.
DA in Gas cutting mean Dissolved Acetylene
Acetone is used in acetylene tanks to absorb and stabilize acetylene gas. It acts as a solvent that helps dissolve acetylene, allowing for safer storage at higher pressures. By absorbing acetylene, acetone prevents the gas from becoming too concentrated, which could lead to instability or detonation. This combination helps ensure the safe handling and transport of acetylene.
acetylene
Acetylene -C2H2