both are same
Ash content is determined by calcination and deionized water is not necessary.
When glucose is mixed with dis-odium hydrogen phosphate with deionized water, there will be a chemical reaction. The deionized water acts as a catalyst to create the foaming that will occur.
since water is pretty neutral, the water does not change color but the universal indicator does. The universal indicator changes color as per the quantity of deionized water... But it changes to straw color or pale yellow in 50mL of deionized water.
Deionized, distilled water
No, Brita filtered water is not deionized. Brita filters primarily use activated carbon to remove impurities like chlorine, pesticides, and organic compounds from tap water, but they do not remove minerals or ions that contribute to water hardness. Deionized water is a different type of purification process that removes nearly all ions from water.
No, distilled water and deionized water are not the same. Distilled water is created by boiling water and collecting the steam, while deionized water is purified by removing ions and minerals.
No, deionized water and reverse osmosis water are not the same. Deionized water has had ions removed through ion exchange, while reverse osmosis water is filtered through a membrane to remove impurities. Both processes produce pure water, but they use different methods to achieve this.
Yes. Essentialy deionized and distilled water are the same because distilled water is just water that has all ions taken out and therefore wont carry and electrical charge.
The deionized water is not an element, but it is a very pure water, without ions in solution.
No, deionized water and ethanol are not the same. Deionized water is water that has had ions removed, making it pure for various applications. Ethanol, on the other hand, is a type of alcohol commonly used as a solvent or fuel.
The resistivity of deionized water is typically around 18.2 megaohm-cm.
No, deionized water is not a mixture. It is a type of water that has had its ions (charged particles) removed through a process called deionization, resulting in a more pure form of water with a neutral pH.
Ash content is determined by calcination and deionized water is not necessary.
Yes, brass fittings can generally be used with deionized water. However, prolonged exposure to deionized water can cause corrosion in brass fittings, so it is advisable to check with the manufacturer or consider using alternative materials for long-term use with deionized water.
The ion-exchange resins that are used to remove certain ions from the water to make it deionized sometimes leave a higher concentration of protons in the water, which makes it slighty acidic.
Yes.
When glucose is mixed with dis-odium hydrogen phosphate with deionized water, there will be a chemical reaction. The deionized water acts as a catalyst to create the foaming that will occur.